PartsTable
Technical Data Sheet
Download PDF

5632FC5P28 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

5632FC5P28: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 OVERALL, bore_shape: STRAIGHT, flange_width: 0.0230 INCHES NOMINAL IN, bore_diameter: 0.1875 INCHES NOMINAL IN, overall_width: 0.1094 INCHES NOMINAL IN, load_direction: RADIAL. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-563-7964, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5632FC5P28
NSN: 3110-00-563-7964
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 40920 — MPB CORP DIV TIMKEN SUPER PRECISION (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 OVERALL
bore_shapeSTRAIGHT
flange_width0.0230 INCHES NOMINAL IN
bore_diameter0.1875 INCHES NOMINAL IN
overall_width0.1094 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
internal_clearance0.0002 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
lubrication_materialOIL
flange_outside_diameter0.3590 INCHES NOMINAL IN
outer_ring_outside_diameter0.3125 INCHES NOMINAL IN
NSN3110-00-563-7964
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 5632FC5P28 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
LUBRICATION MATERIAL: OIL
•
INTERNAL CLEARANCE: 0.0002 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
•
FLANGE OUTSIDE DIAMETER: 0.3590 INCHES NOMINAL IN
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
LUBRICATION MATERIALOIL
INTERNAL CLEARANCE0.0002 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
FLANGE OUTSIDE DIAMETER0.3590 INCHES NOMINAL IN
SURFACE FINISHGROUND
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH0.1094 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
SUBSTITUTES & CROSS-REFERENCES 2
C1220CJ21Reference document
Same NSN cross-reference
Reference document — Secondary reference
79299Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 5632FC5P28?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5632FC5P28?
5632FC5P28 is a BEARING,BALL,ANNULAR.
What parts can replace 5632FC5P28?
There are 2 known substitutes for 5632FC5P28: C1220CJ21, 79299. Substitute compatibility should be verified for your specific system.
What is the NSN for 5632FC5P28?
5632FC5P28 is cataloged in the U.S. Government catalog under NSN 3110-00-563-7964. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5632FC5P28

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.