PartsTable
Technical Data Sheet
Download PDF

5624083 — PLUG,VENT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5624083: PLUG,VENT.

The PLUG,VENT is a the manufacturer industrial component. Key specifications include length: 0.615 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING, thread_class: 3A A, thread_length: 0.405 INCHES NOMINAL IN, vent_hole_shape: ROUND, outside_diameter: 0.800 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-325-9699, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5624083
NSN: 5340-01-325-9699
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
length0.615 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING
thread_class3A A
thread_length0.405 INCHES NOMINAL IN
vent_hole_shapeROUND
outside_diameter0.800 INCHES NOMINAL IN
special_featuresTHREAD SERIES-.437-20UNJF-3A A
surface_treatmentPASSIVATE
vent_hole_diameter0.065 INCHES NOMINAL IN
vent_hole_quantity2
end_connection_typeTHREADED
end_item_identificationMK93 MOD0 FLEET EXERCISE SYS,TORPEDO MK50
NSN5340-01-325-9699
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5624083 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
VENT HOLE DIAMETER: 0.065 INCHES NOMINAL IN
•
LENGTH: 0.615 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
•
VENT HOLE SHAPE: ROUND
•
THREAD LENGTH: 0.405 INCHES NOMINAL IN
•
END CONNECTION TYPE: THREADED
•
UNTHREADED END DIAMETER: 0.800 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.800 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
VENT HOLE DIAMETER0.065 INCHES NOMINAL IN
LENGTH0.615 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
VENT HOLE SHAPEROUND
THREAD LENGTH0.405 INCHES NOMINAL IN
END CONNECTION TYPETHREADED
UNTHREADED END DIAMETER0.800 INCHES NOMINAL IN
OUTSIDE DIAMETER0.800 INCHES NOMINAL IN
SPECIAL FEATURESTHREAD SERIES-.437-20UNJF-3A A
SURFACE TREATMENTPASSIVATE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5624083?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5624083?
5624083 is a PLUG,VENT.
What is the NSN for 5624083?
5624083 is cataloged in the U.S. Government catalog under NSN 5340-01-325-9699. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5624083

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.