5623147: PIN,STRAIGHT,HEADLESS.
The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, first_end_style: CHAMFERED, pin_overall_length: 2.650 INCHES NOMINAL IN, first_hole_diameter: 0.124 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN, pin_overall_diameter: 0.6800 INCHES MINIMUM AND 0.6840 INCHES MAXIMUM IN, second_hole_diameter: 0.124 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN. This part is cataloged in the U.S.
Government catalog under NSN 5315-01-354-3829, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | STEEL CORROSION RESISTING OVERALL |
| first_end_style | CHAMFERED |
| pin_overall_length | 2.650 INCHES NOMINAL IN |
| first_hole_diameter | 0.124 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN |
| pin_overall_diameter | 0.6800 INCHES MINIMUM AND 0.6840 INCHES MAXIMUM IN |
| second_hole_diameter | 0.124 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN |
| first_end_taper_angle | 45.0 DEGREES NOMINAL |
| first_end_taper_length | 0.060 INCHES NOMINAL IN |
| hole_arrangement_style | BOTH END DRILLED |
| second_end_relationship_with_first_end | IDENTICAL |
| center_to_center_distance_between_holes | 2.150 INCHES NOMINAL IN |
| distance_from_centerline_of_hole_to_end_of_pin | 0.250 INCHES NOMINAL IN |
| NSN | 5315-01-354-3829 |
| FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL IN |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| FIRST END STYLE | CHAMFERED |
| FIRST HOLE DIAMETER | 0.124 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| PIN OVERALL DIAMETER | 0.6800 INCHES MINIMUM AND 0.6840 INCHES MAXIMUM IN |
| PIN OVERALL LENGTH | 2.650 INCHES NOMINAL IN |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| SECOND HOLE DIAMETER | 0.124 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN |
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 2.150 INCHES NOMINAL IN |
No substitute or cross-reference records for this part.