PartsTable
Technical Data Sheet
Download PDF

5622652 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5622652: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM IN, length: 1.030 INCHES MINIMUM AND 1.070 INCHES MAXIMUM IN, material: STEEL OVERALL, overall_height: 1.190 INCHES MAXIMUM IN, special_features: ALTERED ITEM; MADE FROM M24066/2-344 W/ ONE PRONG SHORTENED BY 0.130 IN. W, surface_treatment: CADMIUM OVERALL.

This part is cataloged in the U.S. Government catalog under NSN 5340-01-231-7826, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5622652
NSN: 5340-01-231-7826
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
width1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM IN
length1.030 INCHES MINIMUM AND 1.070 INCHES MAXIMUM IN
materialSTEEL OVERALL
overall_height1.190 INCHES MAXIMUM IN
special_featuresALTERED ITEM; MADE FROM M24066/2-344 W/ ONE PRONG SHORTENED BY 0.130 IN. W
surface_treatmentCADMIUM OVERALL
material_thickness0.029 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
loop/holding_dimension0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
distance_from_loop_center_to_end0.565 INCHES NOMINAL IN
NSN5340-01-231-7826
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5622652 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 1.030 INCHES MINIMUM AND 1.070 INCHES MAXIMUM IN
•
LOOP/HOLDING DIMENSION: 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.029 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO END: 0.565 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
WIDTH: 1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.190 INCHES MAXIMUM IN
LENGTH1.030 INCHES MINIMUM AND 1.070 INCHES MAXIMUM IN
LOOP/HOLDING DIMENSION0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
MATERIAL THICKNESS0.029 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO END0.565 INCHES NOMINAL IN
SPECIAL FEATURESALTERED ITEM; MADE FROM M24066/2-344 W/ ONE PRONG SHORTENED BY 0.130 IN. W
SURFACE TREATMENTCADMIUM OVERALL
WIDTH1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 5622652?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5622652?
5622652 is a CLIP,SPRING TENSION.
What is the NSN for 5622652?
5622652 is cataloged in the U.S. Government catalog under NSN 5340-01-231-7826. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5622652

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.