PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 562-5763333 ITEM 45

562-5763333 ITEM 45 — Technical Data Sheet

✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,SELF-ALIGNING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, body_width: 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN, head_style: FLAT FILLISTER, point_type: CONVENTIONAL, body_length: 0.740 INCHES MAXIMUM IN, point_angle: 118.0 DEGREES NOMINAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 3110-01-213-7048, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
562-5763333 ITEM 45
NSN: 3110-01-213-7048
FSC: 3110
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_width0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
head_styleFLAT FILLISTER
point_typeCONVENTIONAL
body_length0.740 INCHES MAXIMUM IN
point_angle118.0 DEGREES NOMINAL
shank_styleSTANDARD TAPER W/TANG
flute_length10.375 INCHES NOMINAL IN
flute_quantity2
overall_length16.250 INCHES NOMINAL IN
fastener_length2.000 INCHES NOMINAL IN
special_featuresWEIGHT 0.02 POUNDS; MATERIAL; ALLOY STEEL; SPECIFICATION ASTM A574 LBS
NSN3110-01-213-7048
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 562-5763333 ITEM 45 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
49271InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
23152InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
23139InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
110S 1-13/16InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
12574InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
53616InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 562-5763333 ITEM 45?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 562-5763333 ITEM 45?
562-5763333 ITEM 45 is a BEARING,ROLLER,SELF-ALIGNING.
What parts can replace 562-5763333 ITEM 45?
There are 14 known substitutes for 562-5763333 ITEM 45: 49271, 23152, 23139 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 562-5763333 ITEM 45?
562-5763333 ITEM 45 is cataloged in the Federal Logistics Information System under NSN 3110-01-213-7048. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 562-5763333 ITEM 45

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026