PartsTable
Technical Data Sheet
Download PDF

5612760-4 — CLAMP,BLOCK

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5612760-4: CLAMP,BLOCK.

The CLAMP,BLOCK is a the manufacturer industrial component. Key specifications include overall_width: 0.938 INCHES NOMINAL IN, overall_length: 2.688 INCHES NOMINAL IN, mounting_facility: UNTHREADED HOLE(S), mounting_hole_diameter: 0.266 INCHES NOMINAL IN, distance_from_end_to_first_clamping_hole_center: 0.526 INCHES NOMINAL IN, distance_from_center_of_mounting_hole_to_edge_along_the_width: 0.469 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-487-0822, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5612760-4
NSN: 5340-01-487-0822
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
overall_width0.938 INCHES NOMINAL IN
overall_length2.688 INCHES NOMINAL IN
mounting_facilityUNTHREADED HOLE(S)
clamping_hole_quantity5
mounting_hole_diameter0.266 INCHES NOMINAL IN
mounting_hole_quantity2
distance_from_end_to_first_clamping_hole_center0.526 INCHES NOMINAL IN
distance_from_center_of_mounting_hole_to_edge_along_the_width0.469 INCHES NOMINAL IN
center_to_center_distance_between_first_and_fifth_clamping_holes2.688 INCHES NOMINAL IN
center_to_center_distance_between_first_and_third_clamping_holes0.722 INCHES NOMINAL IN
center_to_center_distance_between_first_and_fourth_clamping_holes1.177 INCHES NOMINAL IN
center_to_center_distance_between_first_and_second_clamping_holes0.361 INCHES NOMINAL IN
NSN5340-01-487-0822
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5612760-4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 2
•
CLAMPING HOLE QUANTITY: 5
•
CENTER TO CENTER DISTANCE BETWEEN FIRST AND FOURTH CLAMPING HOLES: 1.177 INCHES NOMINAL IN
•
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER: 0.526 INCHES NOMINAL IN
•
MOUNTING HOLE DIAMETER: 0.266 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD CLAMPING HOLES: 0.722 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY2
CLAMPING HOLE QUANTITY5
CENTER TO CENTER DISTANCE BETWEEN FIRST AND FOURTH CLAMPING HOLES1.177 INCHES NOMINAL IN
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER0.526 INCHES NOMINAL IN
MOUNTING HOLE DIAMETER0.266 INCHES NOMINAL IN
OVERALL LENGTH2.688 INCHES NOMINAL IN
OVERALL WIDTH0.938 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD CLAMPING HOLES0.722 INCHES NOMINAL IN
DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH0.469 INCHES NOMINAL IN
MOUNTING FACILITYUNTHREADED HOLE(S)
SUBSTITUTES & CROSS-REFERENCES 1
5612760Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5612760-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5612760-4?
5612760-4 is a CLAMP,BLOCK.
What parts can replace 5612760-4?
There is 1 known substitute for 5612760-4: 5612760. Substitute compatibility should be verified for your specific system.
What is the NSN for 5612760-4?
5612760-4 is cataloged in the U.S. Government catalog under NSN 5340-01-487-0822. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5612760-4

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.