PartsTable
Technical Data Sheet
Download PDF

5611348 — PIN,TAPERED,PLAIN

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

5611348: PIN,TAPERED,PLAIN.

The PIN,TAPERED,PLAIN is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include first_end_style: ROUNDROUND, second_end_style: SLOTTEDSLOTTED, first_end_location: LARGE ENDLARGE END, pin_overall_length: 0.532 INCHES MINIMUM AND 0.532 INCHES MINIMUM AND 0.592 INCHES MAXIMUM0.592 INCHES MAXIMUM IN, pin_size_designation: 5/05/0, second_end_slot_depth: 0.085 INCHES MINIMUM AND 0.085 INCHES MINIMUM AND 0.145 INCHES MAXIMUM0.145 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-357-4513, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5611348
NSN: 5315-01-357-4513
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
first_end_styleROUNDROUND
second_end_styleSLOTTEDSLOTTED
first_end_locationLARGE ENDLARGE END
pin_overall_length0.532 INCHES MINIMUM AND 0.532 INCHES MINIMUM AND 0.592 INCHES MAXIMUM0.592 INCHES MAXIMUM IN
pin_size_designation5/05/0
second_end_slot_depth0.085 INCHES MINIMUM AND 0.085 INCHES MINIMUM AND 0.145 INCHES MAXIMUM0.145 INCHES MAXIMUM IN
second_end_slot_width0.010 INCHES MINIMUM AND 0.010 INCHES MINIMUM AND 0.025 INCHES MAXIMUM0.025 INCHES MAXIMUM IN
second_end_relationship_with_first_endNOT IDENTICALNOT IDENTICAL
NSN5315-01-357-4513
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5611348 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END LOCATION: LARGE ENDLARGE END
•
FIRST END STYLE: ROUNDROUND
•
PIN OVERALL LENGTH: 0.532 INCHES MINIMUM AND 0.532 INCHES MINIMUM AND 0.592 INCHES MAXIMUM0.592 INCHES MAXIMUM IN
•
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICALNOT IDENTICAL
•
SECOND END SLOT DEPTH: 0.085 INCHES MINIMUM AND 0.085 INCHES MINIMUM AND 0.145 INCHES MAXIMUM0.145 INCHES MAXIMUM IN
•
SECOND END SLOT WIDTH: 0.010 INCHES MINIMUM AND 0.010 INCHES MINIMUM AND 0.025 INCHES MAXIMUM0.025 INCHES MAXIMUM IN
•
PIN SIZE DESIGNATION: 5/05/0
•
SECOND END STYLE: SLOTTEDSLOTTED
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
FIRST END LOCATIONLARGE ENDLARGE END
FIRST END STYLEROUNDROUND
PIN OVERALL LENGTH0.532 INCHES MINIMUM AND 0.532 INCHES MINIMUM AND 0.592 INCHES MAXIMUM0.592 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICALNOT IDENTICAL
SECOND END SLOT DEPTH0.085 INCHES MINIMUM AND 0.085 INCHES MINIMUM AND 0.145 INCHES MAXIMUM0.145 INCHES MAXIMUM IN
SECOND END SLOT WIDTH0.010 INCHES MINIMUM AND 0.010 INCHES MINIMUM AND 0.025 INCHES MAXIMUM0.025 INCHES MAXIMUM IN
PIN SIZE DESIGNATION5/05/0
SECOND END STYLESLOTTEDSLOTTED
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5611348?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5611348?
5611348 is a PIN,TAPERED,PLAIN.
What is the NSN for 5611348?
5611348 is cataloged in the U.S. Government catalog under NSN 5315-01-357-4513. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5611348

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.