PartsTable
Technical Data Sheet
Download PDF

5616-40-432-5115 — PLATE,MOUNTING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5616-40-432-5115: PLATE,MOUNTING.

The PLATE,MOUNTING is a the manufacturer industrial component. Key specifications include shape: ROUND, thread_size: 1/4IN-20 IN, outside_diameter: 4.220 INCHES NOMINAL IN, mounting_hole_type: THREADED, mounting_hole_diameter: 0.196 INCHES MINIMUM AND 0.207 INCHES MAXIMUM ALL HOLES IN, screw_thread_series_designator: UNIFIED NATIONAL COARSE (UNC). This part is cataloged in the U.S.

Government catalog under NSN 5340-01-423-5291, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5616-40-432-5115
NSN: 5340-01-423-5291
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
shapeROUND
thread_size1/4IN-20 IN
outside_diameter4.220 INCHES NOMINAL IN
mounting_hole_typeTHREADED
mounting_hole_diameter0.196 INCHES MINIMUM AND 0.207 INCHES MAXIMUM ALL HOLES IN
mounting_hole_quantity4
screw_thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5340-01-423-5291
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5616-40-432-5115 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 4
•
MOUNTING HOLE DIAMETER: 0.196 INCHES MINIMUM AND 0.207 INCHES MAXIMUM ALL HOLES IN
•
SHAPE: ROUND
•
OUTSIDE DIAMETER: 4.220 INCHES NOMINAL IN
•
THREAD SIZE: 1/4IN-20 IN
•
SCREW THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
MOUNTING HOLE TYPE: THREADED
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY4
MOUNTING HOLE DIAMETER0.196 INCHES MINIMUM AND 0.207 INCHES MAXIMUM ALL HOLES IN
SHAPEROUND
OUTSIDE DIAMETER4.220 INCHES NOMINAL IN
THREAD SIZE1/4IN-20 IN
SCREW THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
MOUNTING HOLE TYPETHREADED
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5616-40-432-5115?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5616-40-432-5115?
5616-40-432-5115 is a PLATE,MOUNTING.
What is the NSN for 5616-40-432-5115?
5616-40-432-5115 is cataloged in the U.S. Government catalog under NSN 5340-01-423-5291. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5616-40-432-5115

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.