PartsTable
Technical Data Sheet
Download PDF

560450-1 — TRANSFORMER,POWER AUTOTRANSFORME

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

560450-1: TRANSFORMER,POWER AUTOTRANSFORME.

TRANSFORMER,POWER AUTOTRANSFORME. Key specifications include material: STEEL COMP 1010 OVERALL, hole_diameter: 0.096 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN, inclosure_type: FULLY INCLOSED, overall_height: 0.065 INCHES NOMINAL IN, mounting_method: SLOT SINGLE GROUP, shoulder_height: 0.028 INCHES MINIMUM AND 0.032 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-269-6830, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
560450-1
NSN: 5310-00-269-6830
NIINs: 002696830, 011267345
FSC: 5310 — Nuts and Washers
CAGE: 77068 — ALLIED-SIGNAL INC DBA ALLIED-SIGNAL AEROSPACE CO ELECTRODYNAMICS DIV (USA)
SPECIFICATIONS
materialSTEEL COMP 1010 OVERALL
hole_diameter0.096 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
inclosure_typeFULLY INCLOSED
overall_height0.065 INCHES NOMINAL IN
mounting_methodSLOT SINGLE GROUP
shoulder_height0.028 INCHES MINIMUM AND 0.032 INCHES MAXIMUM IN
frequency_rating400.0 HERTZ NOMINAL SINGLE COMPONENT
outside_diameter0.221 INCHES MINIMUM AND 0.227 INCHES MAXIMUM IN
style_designatorSHOULDERED
shoulder_diameter0.141 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
surface_treatmentCADMIUM OVERALL
material_thickness0.030 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
NSN5310-00-269-6830
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 560450-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHOULDER HEIGHT: 0.028 INCHES MINIMUM AND 0.032 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: SHOULDERED
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.221 INCHES MINIMUM AND 0.227 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.030 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
•
SHOULDER DIAMETER: 0.141 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.065 INCHES NOMINAL IN
SHOULDER HEIGHT0.028 INCHES MINIMUM AND 0.032 INCHES MAXIMUM IN
STYLE DESIGNATORSHOULDERED
MATERIAL DOCUMENT AND CLASSIFICATIONSAE FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER0.221 INCHES MINIMUM AND 0.227 INCHES MAXIMUM IN
MATERIAL THICKNESS0.030 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
SHOULDER DIAMETER0.141 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
MATERIALSTEEL COMP 1010 OVERALL
HOLE DIAMETER0.096 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 7
205081Reference document
Same NSN cross-reference
Reference document — Secondary reference
2350-18F-C3YSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
8846534-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
RF3.5-5Reference document
Same NSN cross-reference
Reference document — Secondary reference
5340-063-0001Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
194694-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 560450-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 560450-1?
560450-1 is a TRANSFORMER,POWER AUTOTRANSFORME.
What parts can replace 560450-1?
There are 7 known substitutes for 560450-1: 205081, 2350-18F-C3Y, 8846534-1 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 560450-1?
560450-1 is cataloged in the U.S. Government catalog under NSN 5310-00-269-6830. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 560450-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.