PartsTable
Technical Data Sheet
Download PDF

560034-3 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

560034-3: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.100 INCHES NOMINAL IN, diameter: 0.3678 INCHES MINIMUM AND 0.3681 INCHES MAXIMUM IN, material: STEEL OVERALL, head_style: DEE, chamfer_length: 0.020 INCHES NOMINAL IN, surface_finish: 16.0 MICROINCHES OUTSIDE DIAMETER. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-182-4075, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
560034-3
NSN: 5315-00-182-4075
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 03104 — TELEDYNE BROWN ENGINEERING, INC. DBA TELEDYNE TURBINE ENGINES DIV TELEDYNE TURBINE ENGINES (USA)
SPECIFICATIONS
height0.100 INCHES NOMINAL IN
diameter0.3678 INCHES MINIMUM AND 0.3681 INCHES MAXIMUM IN
materialSTEEL OVERALL
head_styleDEE
chamfer_length0.020 INCHES NOMINAL IN
surface_finish16.0 MICROINCHES OUTSIDE DIAMETER
special_featuresMATERIAL: STEEL COMP 9310 OVERALL
style_designatorSTRAIGHT
features_providedCASEHARDENED
pin_chamfer_angle30.0 DEGREES NOMINAL
pin_head_diameter0.620 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN
under_head_length1.500 INCHES NOMINAL IN
NSN5315-00-182-4075
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 560034-3 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 16.0 MICROINCHES OUTSIDE DIAMETER
•
CHAMFER LENGTH: 0.020 INCHES NOMINAL IN
•
DISTANCE FROM CENTERLINE TO FLAT: 0.245 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
UNDER HEAD LENGTH: 1.500 INCHES NOMINAL IN
•
PIN CHAMFER ANGLE: 30.0 DEGREES NOMINAL
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 0.620 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN
•
DIAMETER: 0.3678 INCHES MINIMUM AND 0.3681 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE FINISH16.0 MICROINCHES OUTSIDE DIAMETER
CHAMFER LENGTH0.020 INCHES NOMINAL IN
DISTANCE FROM CENTERLINE TO FLAT0.245 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
UNDER HEAD LENGTH1.500 INCHES NOMINAL IN
PIN CHAMFER ANGLE30.0 DEGREES NOMINAL
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.620 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN
DIAMETER0.3678 INCHES MINIMUM AND 0.3681 INCHES MAXIMUM IN
FEATURES PROVIDEDCASEHARDENED
HEAD STYLEDEE
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 560034-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 560034-3?
560034-3 is a PIN,STRAIGHT,HEADED.
What is the NSN for 560034-3?
560034-3 is cataloged in the U.S. Government catalog under NSN 5315-00-182-4075. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 560034-3

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.