PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5600009-001
5600009-001 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, special_features: HOLE DRILLED ON ONE END ON CENTER AXIS 0.120 IN. DIA BY 0.250 IN.

DEEP IN, surface_treatment: CADMIUM AND CHROMATE OVERALL, pin_overall_length: 6.125 INCHES NOMINAL IN, first_hole_diameter: 0.250 INCHES MINIMUM AND 0.256 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-930-5720, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5600009-001
NSN: 5315-00-930-5720
FSC: 5315
CAGE: 29381 — GICHNER SYSTEMS GROUP, INC. DIV C5ISR DIVISION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleCHAMFERED
special_featuresHOLE DRILLED ON ONE END ON CENTER AXIS 0.120 IN. DIA BY 0.250 IN. DEEP IN
surface_treatmentCADMIUM AND CHROMATE OVERALL
pin_overall_length6.125 INCHES NOMINAL IN
first_hole_diameter0.250 INCHES MINIMUM AND 0.256 INCHES MAXIMUM IN
pin_overall_diameter0.7480 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
second_hole_diameter0.250 INCHES MINIMUM AND 0.256 INCHES MAXIMUM IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.062 INCHES NOMINAL IN
hole_arrangement_styleBOTH END DRILLED
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-930-5720
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5600009-001 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.062 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
PIN OVERALL LENGTH: 6.125 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
MATERIAL: STEEL OVERALL
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN: 0.312 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
FIRST END TAPER LENGTH0.062 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
PIN OVERALL LENGTH6.125 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
MATERIALSTEEL OVERALL
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN0.312 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEBOTH END DRILLED
CENTER TO CENTER DISTANCE BETWEEN HOLES5.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
5-60-0009-00Interchangeable
interchangeable cross-reference
interchangeable
5-60-0009Interchangeable
interchangeable cross-reference
interchangeable
KC-79-131Interchangeable
interchangeable cross-reference
interchangeable
126732-0031Interchangeable
interchangeable cross-reference
interchangeable
62B3000-32Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5600009-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5600009-001?
5600009-001 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 5600009-001?
There are 5 known substitutes for 5600009-001: 5-60-0009-00, 5-60-0009, KC-79-131 and 2 more. Substitute compatibility should be verified for your specific system.
Is 5600009-001 still available?
5600009-001 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5600009-001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026