PartsTable
Technical Data Sheet
PartsTable / MRO / 55A0813-24-9
55A0813-24-9 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Stranded for flexible routing, solid for conduit THHN/THWN dual-rated — check both tables
Ampacity depends on installation method
PRODUCT OVERVIEW

The 55A0813-24-9 is a the manufacturer industrial component. Key specifications include material: COPPER CORE CONDUCTOR SINGLE CONDUCTOR, conductor_form: STRANDED SINGLE CONDUCTOR, voltage_rating: 600.0 MAXIMUM ROOT MEAN SQUARE (RMS) OPERATING VOLTAGE SINGLE CONDUCTOR, surface_treatment: NICKEL CORE CONDUCTOR SINGLE CONDUCTOR, round_conductor_size: 24 AWG SINGLE CONDUCTOR, cross-sectional_shape_style: ROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 6145-01-198-5912, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 55A0813-24-9
NSN: 6145-01-198-5912
FSC: 6145
CAGE: 06090 — TE CONNECTIVITY CORPORATION DBA RAYCHEM PRODUCT DIVISION (USA)
SPECIFICATIONS
materialCOPPER CORE CONDUCTOR SINGLE CONDUCTOR
conductor_formSTRANDED SINGLE CONDUCTOR
voltage_rating600.0 MAXIMUM ROOT MEAN SQUARE (RMS) OPERATING VOLTAGE SINGLE CONDUCTOR
surface_treatmentNICKEL CORE CONDUCTOR SINGLE CONDUCTOR
round_conductor_size24 AWG SINGLE CONDUCTOR
cross-sectional_shape_styleROUND
strand_awg_size_per_conductor36 SINGLE CONDUCTOR
strand_quantity_per_conductor19 SINGLE CONDUCTOR
cross_section_outside_diameter0.045 INCHES NOMINAL IN
NSN6145-01-198-5912
COMPONENT DIAGRAM
WIRE / CABLE — AMPACITY DEPENDS ON INSTALLATION CROSS-SECTION JACKET WIRE SPECIFICATIONS Conductor Size: — Conductor Count: — Voltage Rating: — Insulation: — Temp Rating: — PN: 55A0813-24-9 · OEM ⚠ VERIFY BEFORE ORDERING Ampacity depends on installation method — conduit ≠ free air ≠ underground. Same wire, different ratings. AWG sizing is inverse — smaller number = thicker wire (4 AWG > 12 AWG) ✓ BROKER TIP Stranded = flexible routing and vibration resistance. Solid = fixed conduit runs only. THHN/THWN = dual rated — check both dry and wet ampacity tables PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEST DATA DOCUMENT: 81349-MIL-W-22759 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
SURFACE TREATMENT: NICKEL CORE CONDUCTOR SINGLE CONDUCTOR
•
MATERIAL: COPPER CORE CONDUCTOR SINGLE CONDUCTOR
•
STRAND AWG SIZE PER CONDUCTOR: 36 SINGLE CONDUCTOR
•
ROUND CONDUCTOR SIZE: 24 AWG SINGLE CONDUCTOR
•
STRAND QUANTITY PER CONDUCTOR: 19 SINGLE CONDUCTOR
•
VOLTAGE RATING: 600.0 MAXIMUM ROOT MEAN SQUARE (RMS) OPERATING VOLTAGE SINGLE CONDUCTOR
•
CONDUCTOR FORM: STRANDED SINGLE CONDUCTOR
TECHNICAL CHARACTERISTICS (FLIS)
TEST DATA DOCUMENT81349-MIL-W-22759 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
SURFACE TREATMENTNICKEL CORE CONDUCTOR SINGLE CONDUCTOR
MATERIALCOPPER CORE CONDUCTOR SINGLE CONDUCTOR
STRAND AWG SIZE PER CONDUCTOR36 SINGLE CONDUCTOR
ROUND CONDUCTOR SIZE24 AWG SINGLE CONDUCTOR
STRAND QUANTITY PER CONDUCTOR19 SINGLE CONDUCTOR
VOLTAGE RATING600.0 MAXIMUM ROOT MEAN SQUARE (RMS) OPERATING VOLTAGE SINGLE CONDUCTOR
CONDUCTOR FORMSTRANDED SINGLE CONDUCTOR
CROSS-SECTIONAL SHAPE STYLEROUND
CROSS SECTION OUTSIDE DIAMETER0.045 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
M22759/41-20-93Upgraded Successor
successor cross-reference
successor
MIL-W-22759/41Upgraded Successor
successor cross-reference
successor
M22759/41-12-3Upgraded Successor
successor cross-reference
successor
SAE-AS22759/41Upgraded Successor
successor cross-reference
successor
M22759/41-20-9Interchangeable
interchangeable cross-reference
interchangeable
AS22759/41Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 55A0813-24-9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 55A0813-24-9?
55A0813-24-9 is a 55A0813-24-9. It is classified as a MRO (MRO_GENERAL).
What parts can replace 55A0813-24-9?
There are 13 known substitutes for 55A0813-24-9: M22759/41-20-93, MIL-W-22759/41, M22759/41-12-3 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 55A0813-24-9?
55A0813-24-9 is cataloged in the Federal Logistics Information System (FLIS) under NSN 6145-01-198-5912. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 55A0813-24-9

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026