PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5594915
5594915 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BUTTON,PLUG is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYAMIDE NYLON, head_height: 0.062 INCHES NOMINAL IN, overall_height: 0.453 INCHES NOMINAL IN, special_features: COLOR BLACK, style_designator: WIRE SPRING FLANGED BOTTOM, head_outside_diameter: 1.375 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-259-3951, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5594915
NSN: 5340-01-259-3951
FSC: 5340
CAGE: 34623 — AM GENERAL LLC (USA)
SPECIFICATIONS
materialPLASTIC POLYAMIDE NYLON
head_height0.062 INCHES NOMINAL IN
overall_height0.453 INCHES NOMINAL IN
special_featuresCOLOR BLACK
style_designatorWIRE SPRING FLANGED BOTTOM
head_outside_diameter1.375 INCHES NOMINAL IN
bottom_outside_diameter1.250 INCHES NOMINAL IN
hole_accommodation_diameter1.250 INCHES NOMINAL IN
material_accommodated_thickness0.125 INCHES MAXIMUM IN
NSN5340-01-259-3951
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5594915 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: WIRE SPRING FLANGED BOTTOM
•
MATERIAL ACCOMMODATED THICKNESS: 0.125 INCHES MAXIMUM IN
•
BOTTOM OUTSIDE DIAMETER: 1.250 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYAMIDE NYLON
•
HEAD OUTSIDE DIAMETER: 1.375 INCHES NOMINAL IN
•
HOLE ACCOMMODATION DIAMETER: 1.250 INCHES NOMINAL IN
•
HEAD HEIGHT: 0.062 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORWIRE SPRING FLANGED BOTTOM
MATERIAL ACCOMMODATED THICKNESS0.125 INCHES MAXIMUM IN
SPECIAL FEATURESCOLOR BLACK
BOTTOM OUTSIDE DIAMETER1.250 INCHES NOMINAL IN
MATERIALPLASTIC POLYAMIDE NYLON
HEAD OUTSIDE DIAMETER1.375 INCHES NOMINAL IN
HOLE ACCOMMODATION DIAMETER1.250 INCHES NOMINAL IN
HEAD HEIGHT0.062 INCHES NOMINAL IN
OVERALL HEIGHT0.453 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
K71643Interchangeable
interchangeable cross-reference
interchangeable
678Interchangeable
interchangeable cross-reference
interchangeable
2740Interchangeable
IBM PCI RAID Disk Controller
interchangeable
LS9Interchangeable
interchangeable cross-reference
interchangeable
32239Interchangeable
interchangeable cross-reference
interchangeable
SG3918PC25Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5594915?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5594915?
5594915 is a BUTTON,PLUG.
What parts can replace 5594915?
There are 15 known substitutes for 5594915: K71643, 678, 2740 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5594915?
5594915 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-259-3951. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5594915

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026