PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5589897
5589897 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The BRACKET,EYE,ROTATING SHAFT is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, thickness: 0.156 INCHES NOMINAL IN, nut_height: 0.617 INCHES MINIMUM AND 0.665 INCHES MAXIMUM IN, thread_class: 3B, coil_quantity: 10. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-414-2148, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5589897
NSN: 5310-01-414-2148
FSC: 5310
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
thickness0.156 INCHES NOMINAL IN
nut_height0.617 INCHES MINIMUM AND 0.665 INCHES MAXIMUM IN
thread_class3B
coil_quantity10
hole_diameter1.062 INCHES NOMINAL IN
stud_diameter0.625 INCHES NOMINAL IN
thread_seriesUNIFIED NATIONAL COARSE (UNC)
overall_length6.000 INCHES NOMINAL IN
stock_diameter0.687 INCHES NOMINAL IN
inside_diameter6.120 INCHES NOMINAL IN
NSN5310-01-414-2148
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5589897 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 1.062 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
PERIPHERAL SHAPE STYLE: ROUND
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
THICKNESS: 0.156 INCHES NOMINAL IN
•
OVERALL DIAMETER: 2.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER1.062 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
PERIPHERAL SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
THICKNESS0.156 INCHES NOMINAL IN
OVERALL DIAMETER2.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
5589897Interchangeable
interchangeable cross-reference
interchangeable
124-5589897 PC 74Interchangeable
interchangeable cross-reference
interchangeable
124-5589896 PC 16Interchangeable
interchangeable cross-reference
interchangeable
124-5589897 PC 58Interchangeable
interchangeable cross-reference
interchangeable
88-20560Interchangeable
interchangeable cross-reference
interchangeable
B18.2.2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5589897?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5589897?
5589897 is a BRACKET,EYE,ROTATING SHAFT.
What parts can replace 5589897?
There are 17 known substitutes for 5589897: 5589897, 124-5589897 PC 74, 124-5589896 PC 16 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5589897?
5589897 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-414-2148. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5589897

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026