PartsTable
Technical Data Sheet
Download PDF

5582865-C — STRIKE,CATCH

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5582865-C: STRIKE,CATCH.

The STRIKE,CATCH is a the manufacturer industrial component. Key specifications include height: 0.408 INCHES NOMINAL IN, material: UNABLE TO DECODE, overall_width: 1.500 INCHES NOMINAL IN, overall_length: 1.179 INCHES NOMINAL IN, mounting_facility: UNTHREADED HOLE(S), material_thickness: 0.0897 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-190-0815, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5582865-C
NSN: 5340-01-190-0815
FSC: 5340 — Hardware, Commercial
CAGE: 34622 — WINDEN MACHINE (USA)
SPECIFICATIONS
height0.408 INCHES NOMINAL IN
materialUNABLE TO DECODE
overall_width1.500 INCHES NOMINAL IN
overall_length1.179 INCHES NOMINAL IN
mounting_facilityUNTHREADED HOLE(S)
material_thickness0.0897 INCHES NOMINAL IN
first_surface_hole_size0.198 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
first_surface_hole_quantity2
NSN5340-01-190-0815
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5582865-C MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST SURFACE HOLE SIZE: 0.198 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.0897 INCHES NOMINAL IN
•
HEIGHT: 0.408 INCHES NOMINAL IN
•
MOUNTING FACILITY: UNTHREADED HOLE(S)
•
MATERIAL: UNABLE TO DECODE
•
FIRST SURFACE HOLE QUANTITY: 2
TECHNICAL CHARACTERISTICS
OVERALL LENGTH1.179 INCHES NOMINAL IN
OVERALL WIDTH1.500 INCHES NOMINAL IN
FIRST SURFACE HOLE SIZE0.198 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
MATERIAL THICKNESS0.0897 INCHES NOMINAL IN
HEIGHT0.408 INCHES NOMINAL IN
MOUNTING FACILITYUNTHREADED HOLE(S)
MATERIALUNABLE TO DECODE
FIRST SURFACE HOLE QUANTITY2
SUBSTITUTES & CROSS-REFERENCES 5
5342PL0798529Reference document
Same NSN cross-reference
Reference document — Informative reference only
18L01-1X1AAReference document
Same NSN cross-reference
Reference document — Secondary reference
12339761Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
44984Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5582597Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 5582865-C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5582865-C?
5582865-C is a STRIKE,CATCH.
What parts can replace 5582865-C?
There are 5 known substitutes for 5582865-C: 5342PL0798529, 18L01-1X1AA, 12339761 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5582865-C?
5582865-C is cataloged in the U.S. Government catalog under NSN 5340-01-190-0815. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5582865-C