PartsTable
Technical Data Sheet
Download PDF

55701 — GRIP,HANDLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

55701: GRIP,HANDLE.

The GRIP,HANDLE is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, overall_length: 4.938 INCHES MINIMUM AND 5.062 INCHES MAXIMUM IN, inside_diameter: 0.938 INCHES MINIMUM AND 1.062 INCHES MAXIMUM IN, mounting_method: PRESS FIT, outside_diameter: 1.219 INCHES MINIMUM AND 1.343 INCHES MAXIMUM IN, style_designator: CYLINDRICAL. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-888-8146, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
55701
NSN: 5340-00-888-8146
FSC: 5340 — Hardware, Commercial
CAGE: 59462 — TEMPLETON KENLY AND CO INC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
overall_length4.938 INCHES MINIMUM AND 5.062 INCHES MAXIMUM IN
inside_diameter0.938 INCHES MINIMUM AND 1.062 INCHES MAXIMUM IN
mounting_methodPRESS FIT
outside_diameter1.219 INCHES MINIMUM AND 1.343 INCHES MAXIMUM IN
style_designatorCYLINDRICAL
gripping_surface_conditionGRIP AID
NSN5340-00-888-8146
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 55701 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING METHOD: PRESS FIT
•
STYLE DESIGNATOR: CYLINDRICAL
•
OUTSIDE DIAMETER: 1.219 INCHES MINIMUM AND 1.343 INCHES MAXIMUM IN
•
INSIDE DIAMETER: 0.938 INCHES MINIMUM AND 1.062 INCHES MAXIMUM IN
•
GRIPPING SURFACE CONDITION: GRIP AID
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS
MOUNTING METHODPRESS FIT
STYLE DESIGNATORCYLINDRICAL
OVERALL LENGTH4.938 INCHES MINIMUM AND 5.062 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.219 INCHES MINIMUM AND 1.343 INCHES MAXIMUM IN
INSIDE DIAMETER0.938 INCHES MINIMUM AND 1.062 INCHES MAXIMUM IN
GRIPPING SURFACE CONDITIONGRIP AID
MATERIALRUBBER SYNTHETIC OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
DU1-50-6Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 55701?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 55701?
55701 is a GRIP,HANDLE.
What parts can replace 55701?
There is 1 known substitute for 55701: DU1-50-6. Substitute compatibility should be verified for your specific system.
What is the NSN for 55701?
55701 is cataloged in the U.S. Government catalog under NSN 5340-00-888-8146. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 55701