PartsTable
Technical Data Sheet
Download PDF

55596S — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

55596S: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM IN, surface_treatment: CADMIUM CASE, housing_bore_diameter: 10.638 INCHES MINIMUM AND 10.648 INCHES MAXIMUM IN, sealing_element_style: ANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-851-4568, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
55596S
NSN: 5330-00-851-4568
FSC: 5330 — Packing and Gasket Materials
CAGE: 76680 — FEDERAL-MOGUL CORP CHASSIS PRODUCTS DIV (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM IN
surface_treatmentCADMIUM CASE
housing_bore_diameter10.638 INCHES MINIMUM AND 10.648 INCHES MAXIMUM IN
sealing_element_styleANGULAR
accommodated_shaft_diameter9.437 INCHES NOMINAL IN
NSN5330-00-851-4568
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 55596S MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 10.638 INCHES MINIMUM AND 10.648 INCHES MAXIMUM IN
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 9.437 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM CASE
•
MATERIAL: STEEL CASE
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM IN
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER10.638 INCHES MINIMUM AND 10.648 INCHES MAXIMUM IN
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER9.437 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM CASE
MATERIALSTEEL CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
5330008514568Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 55596S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 55596S?
55596S is a SEAL,PLAIN ENCASED.
What parts can replace 55596S?
There is 1 known substitute for 55596S: 5330008514568. Substitute compatibility should be verified for your specific system.
What is the NSN for 55596S?
55596S is cataloged in the U.S. Government catalog under NSN 5330-00-851-4568. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 55596S