PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 55541
55541 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The WIRING HARNESS,BRANCHED is a the manufacturer industrial component. Key specifications include material: STEEL ROD END, fork_depth: 0.6900 INCHES NOMINAL IN, hole_shape: ROUND, hole_diameter: 0.2500 INCHES NOMINAL IN, overall_width: 0.5000 INCHES NOMINAL IN, overall_height: 0.5000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-215-7275, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
55541
NSN: 5340-00-215-7275
FSC: 5340
CAGE: 04627 — HYSTER-YALE GROUP, INC. DIV HYSTER-YALE MATERIALS HANDLING (USA)
SPECIFICATIONS
materialSTEEL ROD END
fork_depth0.6900 INCHES NOMINAL IN
hole_shapeROUND
hole_diameter0.2500 INCHES NOMINAL IN
overall_width0.5000 INCHES NOMINAL IN
overall_height0.5000 INCHES NOMINAL IN
fork_span_width0.2500 INCHES NOMINAL IN
special_featuresTHERE IS A NUT INCLUDED 5/16-24 HEXNUT
style_designatorCLEVIS
end_item_identificationGENERATOR SET
rod_connection_bore_depth0.5000 INCHES NOMINAL IN
securing_pin_hole_diameter0.2500 INCHES NOMINAL IN
NSN5340-00-215-7275
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 55541 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
TH2-16-002Interchangeable
interchangeable cross-reference
interchangeable
HW903-8007Interchangeable
interchangeable cross-reference
interchangeable
FD45-1101-04-04Interchangeable
interchangeable cross-reference
interchangeable
NAS907 TYFSZ11/64Interchangeable
interchangeable cross-reference
interchangeable
40311Interchangeable
interchangeable cross-reference
interchangeable
NAS907Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 55541?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 55541?
55541 is a WIRING HARNESS,BRANCHED.
What parts can replace 55541?
There are 14 known substitutes for 55541: TH2-16-002, HW903-8007, FD45-1101-04-04 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 55541?
55541 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-215-7275. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 55541

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026