PartsTable
Technical Data Sheet
PartsTable / MRO / 5554-4
5554-4 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include body_length: 1.000 INCHES NOMINAL IN, body_diameter: 0.313 INCHES NOMINAL IN, terminal_type: WIRE LEAD, inclosure_type: ENCAPSULATED, mounting_method: THREADED HOLE(S) SINGLE GROUP, terminal_length: 1.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0241, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 5554-4
NSN: 3110-00-100-0241
FSC: 3110
CAGE: 12204 — CHRYSLER REALTY COMPANY LLC DBA DAIMLER CHRYSLER (USA)
SPECIFICATIONS
body_length1.000 INCHES NOMINAL IN
body_diameter0.313 INCHES NOMINAL IN
terminal_typeWIRE LEAD
inclosure_typeENCAPSULATED
mounting_methodTHREADED HOLE(S) SINGLE GROUP
terminal_length1.500 INCHES NOMINAL IN
frequency_rating300.0 HERTZ MINIMUM AND 4.0 KILOHERTZ MAXIMUM SINGLE COMPONENT
style_designatorAXIAL TERMINAL EACH END
nominal_thread_size0.138 INCHES SINGLE GROUP IN
transformer_functionMODULATION
body_outside_diameter1.500 INCHES NOMINAL IN
electrical_resistance220.000 OHMS
NSN3110-00-100-0241
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 5554-4 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
30113Interchangeable
interchangeable cross-reference
interchangeable
30113-0Interchangeable
interchangeable cross-reference
interchangeable
TBB0113Interchangeable
interchangeable cross-reference
interchangeable
10781Interchangeable
interchangeable cross-reference
interchangeable
14258PInterchangeable
interchangeable cross-reference
interchangeable
SK-142174Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5554-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5554-4?
5554-4 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).
What parts can replace 5554-4?
There are 28 known substitutes for 5554-4: 30113, 30113-0, TBB0113 and 25 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5554-4?
5554-4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0241. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5554-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026