PartsTable
Technical Data Sheet
Download PDF

55533-03 — LIGHT EMITTING DIODE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

55533-03: LIGHT EMITTING DIODE.

The LIGHT EMITTING DIODE is a the manufacturer industrial component. Key specifications include material: PLASTIC ENCLOSURE, temp_rating: -40.0 FAHRENHEIT AND 212.0 FAHRENHEIT DEGF, hole_diameter: 0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 0.296 INCHES NOMINAL IN, overall_height: 0.096 INCHES NOMINAL IN, overall_length: 0.300 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-930-6885, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
55533-03
NSN: 5330-00-930-6885
NIINs: 009306885, 012092558, 013159904
FSC: 5330 — Packing and Gasket Materials
CAGE: 92739 — AMPEX SYSTEMS CORP (USA)
SPECIFICATIONS
materialPLASTIC ENCLOSURE
temp_rating-40.0 FAHRENHEIT AND 212.0 FAHRENHEIT DEGF
hole_diameter0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width0.296 INCHES NOMINAL IN
overall_height0.096 INCHES NOMINAL IN
overall_length0.300 INCHES NOMINAL IN
mounting_methodTERMINAL
terminal_length0.125 INCHES MINIMUM IN
outside_diameter6.000 INCHES NOMINAL IN
special_featuresONE BOLT HOLE 0.125 IN. DIA IN
aperture_diameter5.000 INCHES NOMINAL IN
lens_transparencyTRANSLUCENT
NSN5330-00-930-6885
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 55533-03 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -40.0 FAHRENHEIT AND 212.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE DIAMETER: 6.000 INCHES NOMINAL IN
•
APERTURE DIAMETER: 5.000 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 3
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR OVERALL
TECHNICAL CHARACTERISTICS
TEMP RATING-40.0 FAHRENHEIT AND 212.0 FAHRENHEIT DEGF
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE DIAMETER6.000 INCHES NOMINAL IN
APERTURE DIAMETER5.000 INCHES NOMINAL IN
BOLT HOLE QUANTITY3
SPECIAL FEATURESONE BOLT HOLE 0.125 IN. DIA IN
MATERIALRUBBER CHLOROPRENE CLASS CR OVERALL
HOLE DIAMETER0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES 1
55533-03REVAReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 55533-03?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 55533-03?
55533-03 is a LIGHT EMITTING DIODE.
What parts can replace 55533-03?
There is 1 known substitute for 55533-03: 55533-03REVA. Substitute compatibility should be verified for your specific system.
What is the NSN for 55533-03?
55533-03 is cataloged in the U.S. Government catalog under NSN 5330-00-930-6885. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 55533-03