PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 55516
55516 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

BRACKET,BRAKE LINE,LANDING GEAR. Key specifications include width: 3.234 INCHES NOMINAL IN, material: STEEL OVERALL, closed_length: 16.000 INCHES NOMINAL IN, extended_length: 32.000 INCHES NOMINAL IN, side_for_which_designed: LEFT HAND OR RIGHT HAND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-7966, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
55516
NSN: 3110-00-156-7966
FSC: 3110
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
width3.234 INCHES NOMINAL IN
materialSTEEL OVERALL
closed_length16.000 INCHES NOMINAL IN
extended_length32.000 INCHES NOMINAL IN
side_for_which_designedLEFT HAND OR RIGHT HAND
NSN3110-00-156-7966
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 55516 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SELF-ALIGNMENT LOCATION: INTERNAL
•
SHIELD QUANTITY: 2
•
RETAINER FABRICATION METHOD: PRESSED
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
LOAD DIRECTION: ANGULAR
•
SURFACE FINISH: GROUND
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
TECHNICAL CHARACTERISTICS (FLIS)
SELF-ALIGNMENT LOCATIONINTERNAL
SHIELD QUANTITY2
RETAINER FABRICATION METHODPRESSED
INTERNAL FIT-UP DESIGNATIONSTANDARD
LOAD DIRECTIONANGULAR
SURFACE FINISHGROUND
STANDARD TOLERANCE DESIGNATIONABEC NO.1
SELF-ALIGNMENT LOCATIONINTERNAL
BORE SHAPESTRAIGHT
INTERNAL FIT-UP CONTACT ANGULAR DIRECTIONOUTWARD CONVERGENT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
B16-2Interchangeable
interchangeable cross-reference
interchangeable
55516Interchangeable
interchangeable cross-reference
interchangeable
41617Interchangeable
interchangeable cross-reference
interchangeable
M60281Interchangeable
interchangeable cross-reference
interchangeable
2910011590867Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 55516?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 55516?
55516 is a BRACKET,BRAKE LINE,LANDING GEAR.
What parts can replace 55516?
There are 5 known substitutes for 55516: B16-2, 55516, 41617 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 55516?
55516 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-7966. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 55516

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026