PartsTable
Technical Data Sheet
PartsTable / MRO / 55515
55515 ✓ Verified by PartsTable
Hama · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

- Ultra fast removable storage medium<br>- Suitable for terminal devices with MemoryStick Pro Duo slot<br>- Particularly recommendable for high-end digital cameras<br>- Original SanDisk branded product, first equipment quality<br>- Data transfer rate: up to 30 MB/s This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-7959, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 55515
NSN: 3110-00-156-7959
FSC: 3110
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
special_featuresBRACKET 1; STUD 1
NSN3110-00-156-7959
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 55515 · Hama ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL: GREASE
•
RETAINER FABRICATION METHOD: PRESSED
•
SHIELD QUANTITY: 2
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
INTERNAL FIT-UP CONTACT ANGULAR DIRECTION: OUTWARD CONVERGENT
•
SURFACE FINISH: GROUND
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
LOAD DIRECTION: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
LUBRICATION MATERIALGREASE
RETAINER FABRICATION METHODPRESSED
SHIELD QUANTITY2
INTERNAL FIT-UP DESIGNATIONSTANDARD
INTERNAL FIT-UP CONTACT ANGULAR DIRECTIONOUTWARD CONVERGENT
SURFACE FINISHGROUND
STANDARD TOLERANCE DESIGNATIONABEC NO.1
LOAD DIRECTIONANGULAR
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONDOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
BORE SHAPESTRAIGHT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
B94.19 TABLE 41Interchangeable
interchangeable cross-reference
interchangeable
C41615Interchangeable
interchangeable cross-reference
interchangeable
41615Interchangeable
interchangeable cross-reference
interchangeable
55515Interchangeable
interchangeable cross-reference
interchangeable
697LXInterchangeable
interchangeable cross-reference
interchangeable
11906Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 55515?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 55515?
55515 is a TELETYPEWRITER SUBASSEMBLY manufactured by Hama. It is classified as a MRO (MRO_GENERAL).
What parts can replace 55515?
There are 13 known substitutes for 55515: B94.19 TABLE 41, C41615, 41615 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 55515?
55515 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-7959. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 55515

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026