PartsTable
Technical Data Sheet
Download PDF

5548486 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5548486: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 316, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: CUT OUT, first_leg_width: 3.000 INCHES NOMINAL IN, first_leg_length: 0.620 INCHES NOMINAL IN, second_leg_style: SQUARE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-412-4886, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5548486
NSN: 5340-01-412-4886
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL COMP 316
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleCUT OUT
first_leg_width3.000 INCHES NOMINAL IN
first_leg_length0.620 INCHES NOMINAL IN
second_leg_styleSQUARE
second_leg_width3.000 INCHES NOMINAL IN
style_designatorANGLE
second_leg_length1.500 INCHES NOMINAL IN
surface_treatmentPASSIVATE
mounting_hole_typePLAIN
first_leg_thickness0.100 INCHES NOMINAL IN
NSN5340-01-412-4886
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5548486 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.495 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.228 INCHES MINIMUM AND 0.238 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35,TYPE 1 FED SPEC SINGLE TREATMENT RESPONSE
•
SECOND LEG WIDTH: 3.000 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 1.500 INCHES NOMINAL IN
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 0.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.495 INCHES NOMINAL IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE DIAMETER0.228 INCHES MINIMUM AND 0.238 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35,TYPE 1 FED SPEC SINGLE TREATMENT RESPONSE
SECOND LEG WIDTH3.000 INCHES NOMINAL IN
SECOND LEG LENGTH1.500 INCHES NOMINAL IN
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.625 INCHES NOMINAL IN
STYLE DESIGNATORANGLE
FIRST LEG STYLECUT OUT
SUBSTITUTES & CROSS-REFERENCES 1
5938327Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5548486?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5548486?
5548486 is a BRACKET,ANGLE.
What parts can replace 5548486?
There is 1 known substitute for 5548486: 5938327. Substitute compatibility should be verified for your specific system.
What is the NSN for 5548486?
5548486 is cataloged in the U.S. Government catalog under NSN 5340-01-412-4886. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5548486

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.