PartsTable
Technical Data Sheet
Download PDF

5547847 — HANDLE,MANUAL CONTROL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5547847: HANDLE,MANUAL CONTROL.

The HANDLE,MANUAL CONTROL is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061 HANDLE, thread_class: 2A2A, overall_length: 2.080 INCHES NOMINAL2.080 INCHES NOMINAL IN, mounting_method: THREADED STUD(S)THREADED STUD(S), outside_diameter: 0.248 INCHES MINIMUM AND 0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM0.252 INCHES MAXIMUM IN, style_designator: TUBULAR. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-352-2833, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5547847
NSN: 5340-01-352-2833
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 6061 HANDLE
thread_class2A2A
overall_length2.080 INCHES NOMINAL2.080 INCHES NOMINAL IN
mounting_methodTHREADED STUD(S)THREADED STUD(S)
outside_diameter0.248 INCHES MINIMUM AND 0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM0.252 INCHES MAXIMUM IN
style_designatorTUBULAR
surface_treatmentANODIZE HANDLE
nominal_thread_size0.250 INCHES0.250 INCHES IN
mounting_facility_length0.310 INCHES NOMINAL0.310 INCHES NOMINAL IN
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
mounting_facility_quantity11
material_document_and_classificationQQ-A-225/8,T6 FED SPEC SINGLE MATERIAL RESPONSE HANDLE
NSN5340-01-352-2833
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5547847 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY QUANTITY: 11
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TYPE 3,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE HANDLE
•
MOUNTING FACILITY LENGTH: 0.310 INCHES NOMINAL0.310 INCHES NOMINAL IN
•
MOUNTING METHOD: THREADED STUD(S)THREADED STUD(S)
•
STYLE DESIGNATOR: TUBULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/8,T6 FED SPEC SINGLE MATERIAL RESPONSE HANDLE
•
OUTSIDE DIAMETER: 0.248 INCHES MINIMUM AND 0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM0.252 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MOUNTING FACILITY QUANTITY11
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 3,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE HANDLE
MOUNTING FACILITY LENGTH0.310 INCHES NOMINAL0.310 INCHES NOMINAL IN
MOUNTING METHODTHREADED STUD(S)THREADED STUD(S)
STYLE DESIGNATORTUBULAR
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/8,T6 FED SPEC SINGLE MATERIAL RESPONSE HANDLE
OVERALL LENGTH2.080 INCHES NOMINAL2.080 INCHES NOMINAL IN
OUTSIDE DIAMETER0.248 INCHES MINIMUM AND 0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM0.252 INCHES MAXIMUM IN
NOMINAL THREAD SIZE0.250 INCHES0.250 INCHES IN
SURFACE TREATMENTANODIZE HANDLE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5547847?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5547847?
5547847 is a HANDLE,MANUAL CONTROL.
What is the NSN for 5547847?
5547847 is cataloged in the U.S. Government catalog under NSN 5340-01-352-2833. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5547847

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.