PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 554-62
554-62 ✓ Verified by PartsTable
InLine · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The TAPE,MEASURING,REPLACEMENT is a InLine tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include width: 0.500 INCHES NOMINAL IN, material: PAPER OVERALL, end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, body_length: 0.800 INCHES NOMINAL IN, design_type: TANK GAGING, temp_rating: 149.0 CELSIUS DEGC. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-448-4418, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
554-62
NSN: 5330-00-448-4418
FSC: 5330
CAGE: K0161 — PERKINS ENGINES COMPANY LTD - PERKINS PARTS DISTRIBUTION CENTRE UK (GBR)
SPECIFICATIONS
width0.500 INCHES NOMINAL IN
materialPAPER OVERALL
end_styleSPRING END,SQUARED AND GROUND BOTH ENDS
body_length0.800 INCHES NOMINAL IN
design_typeTANK GAGING
temp_rating149.0 CELSIUS DEGC
marking_typeETCHED
bore_diameter0.970 INCHES NOMINAL IN
coil_quantity8 1/4
rating_methodELECTRICAL SINGLE COMPONENT SINGLE WINDING
inclosure_typeHERMETICALLY SEALED
inductance_typeFIXED
NSN5330-00-448-4418
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 554-62 MFR: InLine ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
55462Interchangeable
interchangeable cross-reference
interchangeable
129-120-0153Interchangeable
interchangeable cross-reference
interchangeable
26-5058-01Interchangeable
interchangeable cross-reference
interchangeable
1PF55462Interchangeable
interchangeable cross-reference
interchangeable
LC507C-75Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 554-62?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 554-62?
554-62 is a TAPE,MEASURING,REPLACEMENT manufactured by InLine.
What parts can replace 554-62?
There are 5 known substitutes for 554-62: 55462, 129-120-0153, 26-5058-01 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 554-62?
554-62 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-448-4418. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 554-62

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026