PartsTable
Technical Data Sheet
Download PDF

5532MCB274-80 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

5532MCB274-80: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 440A INNER RACE A, bore_shape: STRAIGHT, bore_diameter: 0.1562 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND, inner_ring_width: 0.1240 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-421-0509, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5532MCB274-80
NSN: 3110-00-421-0509
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 40920 — MPB CORP DIV TIMKEN SUPER PRECISION (USA)
SPECIFICATIONS
materialSTEEL COMP 440A INNER RACE A
bore_shapeSTRAIGHT
bore_diameter0.1562 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
inner_ring_width0.1240 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN
outer_ring_width0.0927 INCHES MINIMUM AND 0.0937 INCHES MAXIMUM IN
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
overall_outside_diameter0.3360 INCHES MINIMUM AND 0.3362 INCHES MAXIMUM IN
retainer_fabrication_methodMACHINED
standard_tolerance_designationABEC NO.9
NSN3110-00-421-0509
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 5532MCB274-80 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
OUTER RING WIDTH: 0.0927 INCHES MINIMUM AND 0.0937 INCHES MAXIMUM IN
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 0.3360 INCHES MINIMUM AND 0.3362 INCHES MAXIMUM IN
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.9
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODMACHINED
OUTER RING WIDTH0.0927 INCHES MINIMUM AND 0.0937 INCHES MAXIMUM IN
SURFACE FINISHGROUND
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL OUTSIDE DIAMETER0.3360 INCHES MINIMUM AND 0.3362 INCHES MAXIMUM IN
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
STANDARD TOLERANCE DESIGNATIONABEC NO.9
BORE DIAMETER0.1562 INCHES NOMINAL IN
MATERIALSTEEL COMP 440A BALL A
SUBSTITUTES & CROSS-REFERENCES 2
131-0338-001Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
131-0338-002Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 5532MCB274-80?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5532MCB274-80?
5532MCB274-80 is a BEARING,BALL,ANNULAR.
What parts can replace 5532MCB274-80?
There are 2 known substitutes for 5532MCB274-80: 131-0338-001, 131-0338-002. Substitute compatibility should be verified for your specific system.
What is the NSN for 5532MCB274-80?
5532MCB274-80 is cataloged in the U.S. Government catalog under NSN 3110-00-421-0509. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5532MCB274-80

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.