PartsTable
Technical Data Sheet

55317 — Technical Data Sheet

✓ Verified by PartsTable
Verbatim · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Overview<br>PLA is an easy-to-print filament made of renewable plant-based resources. Verbatim PLA is made to a special recipe with high quality controls as standard. It is odourless with good post-printing workability, making it a wonderful all-purpose material for a wide range of applications including concept modelling and education.

This part is cataloged in the Federal Logistics Information System under NSN 5331-00-526-5559, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
55317
NSN: 5331-00-526-5559
FSC: 5331 — O-RING
CAGE: 78640 — MITSUBISHI CATERPILLAR FORKLIFT AMERICA, INC (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
center_hole_diameter0.546 INCHES MINIMUM AND 0.556 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5331-00-526-5559
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 55317 MFR: Verbatim ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.546 INCHES MINIMUM AND 0.556 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.546 INCHES MINIMUM AND 0.556 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
52550InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
51A25313InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
4400171-0150InterchangeableGOVERNMENT REGISTRY
Same NIIN cross-reference
interchangeable
16606A01-91InterchangeableGOVERNMENT REGISTRY
Same NIIN cross-reference
interchangeable
PD5330-217-8InterchangeableGOVERNMENT REGISTRY
Same NIIN cross-reference
interchangeable
9090885-18InterchangeableGOVERNMENT REGISTRY
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLEDGOVERNMENT REGISTRY
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 55317?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 55317?
55317 is a FILTER ELEMENT,FLUID manufactured by Verbatim.
What parts can replace 55317?
There are 6 known substitutes for 55317: 52550, 51A25313, 4400171-0150 and 3 more. Substitute compatibility should be verified for your specific system.
Is 55317 still available?
55317 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 55317