PartsTable
Technical Data Sheet
55315 ✓ Verified by PartsTable
Verbatim · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Overview<br>PLA is an easy-to-print filament made of renewable plant-based resources. Verbatim PLA is made to a special recipe with high quality controls as standard. It is odourless with good post-printing workability, making it a wonderful all-purpose material for a wide range of applications including concept modelling and education.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-292-6952, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
55315
NSN: 5330-00-292-6952
FSC: 5330
CAGE: 76680 — FEDERAL-MOGUL CORP CHASSIS PRODUCTS DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleSPLINE
nut_height0.854 INCHES MINIMUM AND 0.864 INCHES MAXIMUM IN
temp_rating550.0 FAHRENHEIT MAXIMUM DEGF
nut_diameter1.085 INCHES MINIMUM AND 1.090 INCHES MAXIMUM IN
pilot_length0.645 INCHES MINIMUM AND 0.670 INCHES MAXIMUM IN
thread_class3B
thread_seriesUNF
pilot_diameter0.917 INCHES MAXIMUM IN
locking_featureFREE-RUNNING ALL METAL DESIGN
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
NSN5330-00-292-6952
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 55315 MFR: Verbatim ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
HOUSING BORE DIAMETER: 3.623 INCHES NOMINAL IN
MATERIAL: STEEL CASE
CASE STYLE: SQUARE
SEALING ELEMENT STYLE: ANGULAR
ACCOMMODATED SHAFT DIAMETER: 2.750 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
SEAL WIDTH: 0.469 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HOUSING BORE DIAMETER3.623 INCHES NOMINAL IN
MATERIALSTEEL CASE
CASE STYLESQUARE
SEALING ELEMENT STYLEANGULAR
MATERIALLEATHER SEALING ELEMENT
ACCOMMODATED SHAFT DIAMETER2.750 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
SEAL WIDTH0.469 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
5531Interchangeable
interchangeable cross-reference
interchangeable
5531-5Interchangeable
interchangeable cross-reference
interchangeable
00044Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 55315?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 55315?
55315 is a NUT,SELF-LOCKING,SPLINE manufactured by Verbatim.
What parts can replace 55315?
There are 3 known substitutes for 55315: 5531, 5531-5, 00044. Substitute compatibility should be verified for your specific system.
What is the NSN for 55315?
55315 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-292-6952. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 55315