5530-5 — BEARING,PLAIN,SELF-ALIGNING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

5530-5: BEARING,PLAIN,SELF-ALIGNING.

The BEARING,PLAIN,SELF-ALIGNING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 440C INNER MEMBER, case_style: SQUARE, seal_width: 0.625 INCHES NOMINAL IN, bore_diameter: 0.3745 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN, hardness_rating: 28.0 ROCKWELL C MINIMUM AND 36.0 ROCKWELL C MAXIMUM OUTER RACE MEMBER, style_designator: WITHOUT INSERT OR LINER. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-179-0972, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

5530-5

NSN: 5330-00-179-0972
NIINs: 001790972, 007187915, 010276306, 011186068
FSC: 5330 — Packing and Gasket Materials
CAGE: 76680 — FEDERAL-MOGUL CORP CHASSIS PRODUCTS DIV (USA)

SPECIFICATIONS

material	STEEL COMP 440C INNER MEMBER
case_style	SQUARE
seal_width	0.625 INCHES NOMINAL IN
bore_diameter	0.3745 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
hardness_rating	28.0 ROCKWELL C MINIMUM AND 36.0 ROCKWELL C MAXIMUM OUTER RACE MEMBER
style_designator	WITHOUT INSERT OR LINER
inner_member_width	0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
outer_member_width	0.4010 INCHES MINIMUM AND 0.4110 INCHES MAXIMUM IN
lubrication_feature	GROOVE OUTER RACE MEMBER
housing_bore_diameter	4.501 INCHES NOMINAL IN
sealing_element_style	ANGULAR
static_radial_load_rating	28000 POUNDS LBS
NSN	5330-00-179-0972

COMPONENT DIAGRAM

KEY FEATURES

•

SEAL WIDTH: 0.625 INCHES NOMINAL IN

•

SEALING ELEMENT STYLE: ANGULAR

•

HOUSING BORE DIAMETER: 4.501 INCHES NOMINAL IN

•

ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT

•

CASE STYLE: SQUARE

•

ACCOMMODATED SHAFT DIAMETER: 3.500 INCHES NOMINAL IN

•

MATERIAL: STEEL CASE

TECHNICAL CHARACTERISTICS

SEAL WIDTH	0.625 INCHES NOMINAL IN
SEALING ELEMENT STYLE	ANGULAR
HOUSING BORE DIAMETER	4.501 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED	2000 FEET PER MINUTE FT
CASE STYLE	SQUARE
ACCOMMODATED SHAFT DIAMETER	3.500 INCHES NOMINAL IN
MATERIAL	STEEL CASE
MATERIAL	LEATHER SEALING ELEMENT

SUBSTITUTES & CROSS-REFERENCES 8

TX155Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

5947Reference document

Same NSN cross-reference

Reference document — Secondary reference

18GET15Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

P6296Reference document

Same NSN cross-reference

Reference document — Secondary reference

428806Reference document

Same NSN cross-reference

Reference document — Secondary reference

5194527Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 5530-5?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 5530-5?

5530-5 is a BEARING,PLAIN,SELF-ALIGNING.

What parts can replace 5530-5?

There are 8 known substitutes for 5530-5: TX155, 5947, 18GET15 and 5 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 5530-5?

5530-5 is cataloged in the U.S. Government catalog under NSN 5330-00-179-0972. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

5530-5 — BEARING,PLAIN,SELF-ALIGNING

Request a Quote — 5530-5