PartsTable
Technical Data Sheet
PartsTable / MRO / 5522-7
5522-7 ✓ Verified by PartsTable
Jumbo · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The FUSE,CARTRIDGE is a Jumbo industrial component. Key specifications include color: BLACK, material: CERAMIC CASE, case_style: SQUARE, seal_width: 1.000 INCHES NOMINAL IN, temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF, overall_length: 1.000 INCHES IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-154-8675, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 5522-7
NSN: 5330-00-154-8675
FSC: 5330
CAGE: 01212 — FEDERAL-MOGUL CORP GOVERNMENT SALES DEPT (USA)
SPECIFICATIONS
colorBLACK
materialCERAMIC CASE
case_styleSQUARE
seal_width1.000 INCHES NOMINAL IN
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
overall_length1.000 INCHES IN
hardness_rating80.0 SHORE DUROMETER A NOMINAL OVERALL
outside_diameter12.508 INCHES NOMINAL IN
basic_shape_styleCRIMP
features_providedNONRENEWABLE FUSIBLE ELEMENT
housing_bore_diameter12.500 INCHES NOMINAL IN
sealing_element_styleANGULAR
NSN5330-00-154-8675
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5522-7 MFR: Jumbo ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CASE STYLE: SQUARE
•
HOUSING BORE DIAMETER: 12.500 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 12.508 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT DIAMETER: 10.500 INCHES NOMINAL IN
•
HARDNESS RATING: 80.0 SHORE DUROMETER A NOMINAL OVERALL
•
MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
•
SEAL WIDTH: 1.000 INCHES NOMINAL IN
•
COLOR: BLACK
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLESQUARE
HOUSING BORE DIAMETER12.500 INCHES NOMINAL IN
OUTSIDE DIAMETER12.508 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER10.500 INCHES NOMINAL IN
HARDNESS RATING80.0 SHORE DUROMETER A NOMINAL OVERALL
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
SEAL WIDTH1.000 INCHES NOMINAL IN
COLORBLACK
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
121016Interchangeable
interchangeable cross-reference
interchangeable
V121016Interchangeable
interchangeable cross-reference
interchangeable
16567DInterchangeable
interchangeable cross-reference
interchangeable
2UU0-54Interchangeable
interchangeable cross-reference
interchangeable
2440-54Interchangeable
interchangeable cross-reference
interchangeable
11328FInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5522-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5522-7?
5522-7 is a FUSE,CARTRIDGE manufactured by Jumbo. It is classified as a MRO (MRO_GENERAL).
What parts can replace 5522-7?
There are 20 known substitutes for 5522-7: 121016, V121016, 16567D and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5522-7?
5522-7 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-154-8675. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5522-7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026