PartsTable
Technical Data Sheet
Download PDF

5520296 — HOUSING,PAWL,EJECTO

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5520296: HOUSING,PAWL,EJECTO.

The HOUSING,PAWL,EJECTO is a the manufacturer industrial component. Key specifications include body_recess_depth: 0.275 INCHES MINIMUM AND 0.278 INCHES MAXIMUM IN, peripheral_diameter: 1.182 INCHES MINIMUM AND 1.184 INCHES MAXIMUM IN, body_recess_diameter: 0.992 INCHES MINIMUM AND 0.994 INCHES MAXIMUM IN, center_hole_diameter: 0.763 INCHES MINIMUM AND 0.765 INCHES MAXIMUM IN, cross-sectional_height: 0.471 INCHES MINIMUM AND 0.474 INCHES MAXIMUM IN, cross-sectional_shape_style: FLANGE. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-884-8086, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5520296
NSN: 5330-00-884-8086
NIINs: 008848086, 011744193
FSC: 5330 — Packing and Gasket Materials
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
body_recess_depth0.275 INCHES MINIMUM AND 0.278 INCHES MAXIMUM IN
peripheral_diameter1.182 INCHES MINIMUM AND 1.184 INCHES MAXIMUM IN
body_recess_diameter0.992 INCHES MINIMUM AND 0.994 INCHES MAXIMUM IN
center_hole_diameter0.763 INCHES MINIMUM AND 0.765 INCHES MAXIMUM IN
cross-sectional_height0.471 INCHES MINIMUM AND 0.474 INCHES MAXIMUM IN
cross-sectional_shape_styleFLANGE
flanged_body_outside_diameter0.986 INCHES MINIMUM AND 0.990 INCHES MAXIMUM IN
NSN5330-00-884-8086
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5520296 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.471 INCHES MINIMUM AND 0.474 INCHES MAXIMUM IN
•
BODY RECESS DIAMETER: 0.992 INCHES MINIMUM AND 0.994 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: FLANGE
•
FLANGED BODY OUTSIDE DIAMETER: 0.986 INCHES MINIMUM AND 0.990 INCHES MAXIMUM IN
•
PERIPHERAL DIAMETER: 1.182 INCHES MINIMUM AND 1.184 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.763 INCHES MINIMUM AND 0.765 INCHES MAXIMUM IN
•
BODY RECESS DEPTH: 0.275 INCHES MINIMUM AND 0.278 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.471 INCHES MINIMUM AND 0.474 INCHES MAXIMUM IN
BODY RECESS DIAMETER0.992 INCHES MINIMUM AND 0.994 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLEFLANGE
FLANGED BODY OUTSIDE DIAMETER0.986 INCHES MINIMUM AND 0.990 INCHES MAXIMUM IN
PERIPHERAL DIAMETER1.182 INCHES MINIMUM AND 1.184 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.763 INCHES MINIMUM AND 0.765 INCHES MAXIMUM IN
BODY RECESS DEPTH0.275 INCHES MINIMUM AND 0.278 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 3
C6808Reference document
Same NSN cross-reference
Reference document — Secondary reference
1560H21-206-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
1560H21-206Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5520296?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5520296?
5520296 is a HOUSING,PAWL,EJECTO.
What parts can replace 5520296?
There are 3 known substitutes for 5520296: C6808, 1560H21-206-1, 1560H21-206. Substitute compatibility should be verified for your specific system.
What is the NSN for 5520296?
5520296 is cataloged in the U.S. Government catalog under NSN 5330-00-884-8086. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5520296

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.