PartsTable
Technical Data Sheet
Download PDF

551297 — BEARING,BALL,ANNULAR

✓ Government record, cited
bluechip · TAPERED BEARING
PRODUCT OVERVIEW

551297: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a bluechip industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 1.7715 INCHES MINIMUM AND 1.7717 INCHES MAXIMUM IN, overall_width: 0.4674 INCHES MINIMUM AND 0.4724 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: UNGROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-054-6334, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
551297
NSN: 3110-01-054-6334
NIINs: 010546334, 010624731, 015007610
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 43991 — FAG BEARINGS CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter1.7715 INCHES MINIMUM AND 1.7717 INCHES MAXIMUM IN
overall_width0.4674 INCHES MINIMUM AND 0.4724 INCHES MAXIMUM IN
load_directionRADIAL
surface_finishUNGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
surface_treatmentSILVER CAGE
end_item_identificationF-16 ACFT
overall_outside_diameter2.6769 INCHES MINIMUM AND 2.6772 INCHES MAXIMUM IN
retainer_fabrication_methodMACHINED
standard_tolerance_designationABEC NO.5
NSN3110-01-054-6334
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 551297 · bluechip ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
INTERNAL CLEARANCE: 0.0012 INCHES MINIMUM RADIAL AND 0.0016 INCHES MAXIMUM RADIAL IN
•
SURFACE FINISH: UNGROUND
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: -50 STEEL,99167 MFR REF 1ST MATERIAL RESPONSE BALL
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODMACHINED
INTERNAL CLEARANCE0.0012 INCHES MINIMUM RADIAL AND 0.0016 INCHES MAXIMUM RADIAL IN
SURFACE FINISHUNGROUND
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIAL DOCUMENT AND CLASSIFICATION-50 STEEL,99167 MFR REF 1ST MATERIAL RESPONSE BALL
MATERIAL DOCUMENT AND CLASSIFICATION-50 STEEL,99167 MFR REF 2ND MATERIAL RESPONSE INNER RING
MATERIAL DOCUMENT AND CLASSIFICATION-50 STEEL,99167 MFR REF 3RD MATERIAL RESPONSE OUTER RING
OVERALL WIDTH0.4674 INCHES MINIMUM AND 0.4724 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER2.6769 INCHES MINIMUM AND 2.6772 INCHES MAXIMUM IN
BORE SHAPESTRAIGHT
SUBSTITUTES & CROSS-REFERENCES 4
5HKH009-42Reference document
Same NSN cross-reference
Reference document — Secondary reference
19095-8Reference document
Same NSN cross-reference
Reference document — Secondary reference
AAV9309K3MSRA2852Reference document
Same NSN cross-reference
Reference document — Secondary reference
5902022Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 551297?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 551297?
551297 is a BEARING,BALL,ANNULAR manufactured by bluechip.
What parts can replace 551297?
There are 4 known substitutes for 551297: 5HKH009-42, 19095-8, AAV9309K3MSRA2852 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 551297?
551297 is cataloged in the U.S. Government catalog under NSN 3110-01-054-6334. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 551297