The Lumber,hardwood, cataloged under National Stock Number 5510-01-582-7710, is classified within Federal Supply Class 5510 (Lumber and Related Basic Wood Materials) of the Lumber, Millwork, Plywood, and Veneer group. Government technical data includes 5 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5510-01-582-7710 |
| Item Name | Lumber,hardwood |
| FSC / FSG | 5510 / 55 — Lumber and Related Basic Wood Materials |
| Status | ACTIVE |
| Width-Location and Measuring Method | 14.000 INCHES NOMINAL OVERALL SPECIFIED IN |
| Measuring Method and Length | 8.000 FEET NOMINAL RANDOM FT |
| Species-Grade and Grading Association | OAK, WHITE SELECT CAR STOCK NATIONAL HARDWOOD LUMBER ASSOCIATION |
| Thickness-Location and Measuring Method | 2.000 INCHES NOMINAL OVERALL SPECIFIED IN |
| Surface Condition Degree | SURFACED FOUR SIDES OR ROUGH-UNSANDED FULL LENGTH |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| PS 20-05 | 3/1 Design control — primary reference American Lumber Standard Committee Inc |
| MM-L-751 | 5/9 Secondary reference U.S. Government activity |
NSN 5510-01-582-7710 is a Lumber,hardwood, classified under FSC 5510, Lumber and Related Basic Wood Materials. Status: active.
Key specifications for 5510-01-582-7710: Width-Location and Measuring Method: 14.000 INCHES NOMINAL OVERALL SPECIFIED IN; Measuring Method and Length: 8.000 FEET NOMINAL RANDOM FT; Species-Grade and Grading Association: OAK, WHITE SELECT CAR STOCK NATIONAL HARDWOOD LUMBER ASSOCIATION; Special Features: S4S SURFACING FOR ORDERS DELIVERED TO KINGS BAY, GA; 8 FEET AND LONGER IN 4 FEET INCREMENTS, 60 PERCENT OR THE LINE ITEM QUANTITY TO BE 12 FEET AND LONGER IN 4 FEET INCREMENTS; IAW FED SPEC MM-L-276 TYPE II; EACH LAYER SHALL BE STICKERED WITH A 2 INCH BOARD; ONE COAT OF COMMERCIAL END-COATING SHALL BE APPLIED TO BOTH ENDS WITHIN 24 HRS AFTER SAWING; A SECOND COAT SHALL BE APPLIED NO SOONER THAN 24 HOURS LATER IN. 5 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.