PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5505400
5505400 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STRAP,WEBBING is a the manufacturer industrial component. Key specifications include width: 2.000 INCHES NOMINAL IN, length: 72.000 INCHES NOMINAL IN, end_type: W/ATTACHMENT FIRST END, material: PLASTIC POLYAMIDE NYLON LOCATION NOT OTHERWISE SPECIFIED, fastener_type: BUCKLE LOCATION NOT OTHERWISE SPECIFIED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-366-2405, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5505400
NSN: 5340-01-366-2405
FSC: 5340
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
width2.000 INCHES NOMINAL IN
length72.000 INCHES NOMINAL IN
end_typeW/ATTACHMENT FIRST END
materialPLASTIC POLYAMIDE NYLON LOCATION NOT OTHERWISE SPECIFIED
fastener_typeBUCKLE LOCATION NOT OTHERWISE SPECIFIED
NSN5340-01-366-2405
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5505400 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: PLASTIC POLYAMIDE NYLON LOCATION NOT OTHERWISE SPECIFIED
•
END TYPE: W/ATTACHMENT FIRST END
•
FASTENER TYPE: BUCKLE LOCATION NOT OTHERWISE SPECIFIED
•
LENGTH: 72.000 INCHES NOMINAL IN
•
WIDTH: 2.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALPLASTIC POLYAMIDE NYLON LOCATION NOT OTHERWISE SPECIFIED
END TYPEW/ATTACHMENT FIRST END
FASTENER TYPEBUCKLE LOCATION NOT OTHERWISE SPECIFIED
END TYPEPLAIN SECOND END
LENGTH72.000 INCHES NOMINAL IN
WIDTH2.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
60-9-26Interchangeable
interchangeable cross-reference
interchangeable
FFB571ATYPEB2CLASSCInterchangeable
interchangeable cross-reference
interchangeable
X752CInterchangeable
interchangeable cross-reference
interchangeable
2142520-1Interchangeable
interchangeable cross-reference
interchangeable
00512-0270-0001Interchangeable
interchangeable cross-reference
interchangeable
93406006Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5505400?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5505400?
5505400 is a STRAP,WEBBING.
What parts can replace 5505400?
There are 6 known substitutes for 5505400: 60-9-26, FFB571ATYPEB2CLASSC, X752C and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5505400?
5505400 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-366-2405. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5505400

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026