PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 55044
55044 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include temp_rating: -40.0 FAHRENHEIT AND 160.0 FAHRENHEIT SINGLE RESPONSE DEGF, exterior_color: BLACK, operating_pressure: 225.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS, burst_test_pressure: 900.0 POUNDS PER SQUARE INCH LBS, end_item_identification: ORDALT 16976,MK7MOD0 RADAR ASSY MODULE, inside_surface_condition: SMOOTH. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-082-4972, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
55044
NSN: 5330-00-082-4972
FSC: 5330
CAGE: 94861 — MALABAR (USA)
SPECIFICATIONS
temp_rating-40.0 FAHRENHEIT AND 160.0 FAHRENHEIT SINGLE RESPONSE DEGF
exterior_colorBLACK
operating_pressure225.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure900.0 POUNDS PER SQUARE INCH LBS
end_item_identificationORDALT 16976,MK7MOD0 RADAR ASSY MODULE
inside_surface_conditionSMOOTH
media_for_which_designedETHYLENE GLYCOL SINGLE RESPONSE
hydrostatic_test_pressure450.0 POUNDS PER SQUARE INCH LBS
minimum_inside_bending_radius1.250 INCHES IN
part_name_assigned_by_controlling_agencyINAVY-HOSE ASSEMBLY,NONMETALLIC
NSN5330-00-082-4972
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 55044 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.531 INCHES MINIMUM AND 0.593 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN
•
PERIPHERAL DIAMETER: 0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM IN
•
JOINT TYPE: SCARF-PERIPHERAL OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 162 FSCM 73680 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR
•
MATERIAL: ASBESTOS OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.531 INCHES MINIMUM AND 0.593 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN
PERIPHERAL DIAMETER0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM IN
JOINT TYPESCARF-PERIPHERAL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION162 FSCM 73680 MFR REF SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR
MATERIALASBESTOS OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
57546Interchangeable
interchangeable cross-reference
interchangeable
61216Interchangeable
interchangeable cross-reference
interchangeable
S8RInterchangeable
interchangeable cross-reference
interchangeable
C67373Interchangeable
interchangeable cross-reference
interchangeable
8505209Interchangeable
interchangeable cross-reference
interchangeable
07-200267Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 55044?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 55044?
55044 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 55044?
There are 16 known substitutes for 55044: 57546, 61216, S8R and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 55044?
55044 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-082-4972. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 55044

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026