5504071 — TRANSFORMER,POWER

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

5504071: TRANSFORMER,POWER.

The TRANSFORMER,POWER is a the manufacturer industrial component. Key specifications include body_width: 3.250 INCHES MINIMUM AND 3.375 INCHES MAXIMUM IN, body_height: 4.124 INCHES MINIMUM AND 4.312 INCHES MAXIMUM IN, body_length: 3.813 INCHES MINIMUM AND 3.938 INCHES MAXIMUM IN, inclosure_type: HERMETICALLY SEALED, overall_height: 4.562 INCHES MINIMUM AND 4.874 INCHES MAXIMUM IN, mounting_method: THREADED STUD(S) SINGLE GROUP. This part is cataloged in the U.S.

Government catalog under NSN 1005-00-550-4071, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

5504071

NSN: 1005-00-550-4071
NIINs: 005504071, 010604911
FSC: 1005 — Guns, Through 30mm
CAGE: 19200 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV LOGISTICS RESEARCH AND ENGINEERING DIRECTORATE (USA)

SPECIFICATIONS

body_width	3.250 INCHES MINIMUM AND 3.375 INCHES MAXIMUM IN
body_height	4.124 INCHES MINIMUM AND 4.312 INCHES MAXIMUM IN
body_length	3.813 INCHES MINIMUM AND 3.938 INCHES MAXIMUM IN
inclosure_type	HERMETICALLY SEALED
overall_height	4.562 INCHES MINIMUM AND 4.874 INCHES MAXIMUM IN
mounting_method	THREADED STUD(S) SINGLE GROUP
frequency_rating	60.0 HERTZ NOMINAL SINGLE COMPONENT
nominal_thread_size	0.190 INCHES SINGLE GROUP IN
reliability_indicator	NOT ESTABLISHED
end_item_identification	M-2 .50 CAL MACHINE GUN; NSN 1005-00-322-9715
thread_quantity_per_inch	32 SINGLE GROUP
thread_series_designator	UNF SINGLE GROUP
NSN	1005-00-550-4071

COMPONENT DIAGRAM

TECHNICAL CHARACTERISTICS

SPECIAL FEATURES	STEEL, ASTM A331, 4140, 4150, 8645, OR STEEL QQ-S-637, 1117; INVESTMENT CASTING; MIL-S-22141, IC 4140, IC 8640, TENSILE TEST IS NOT APPICABLE, CASTING PER MIL-C-6021, CLASS 2, GRADE B; BRAZING MATERIAL IS BRAZING ALLOY, QQ-B-650, BCU-1; HARDEN AND TEMPER TO ROCKWELL A73-76.5; FOR 1117, CARBURIZE LG. AT 1575-1600 DEG F. TO CASE DEPTH OF 0.005-0.008, OIL QUENCH, TEMPER 30 MIN. TO FILE HARDNESS; MANGANESE PHOSPHATE OR ZINC PHOSPHATE, MIL-P-16232, CLASS 1, TYPE M OR Z; BRAZED JOINT WILL WITHSTAND AN AXIAL LOAD OF 1000 LBS. WITHOUT EVIDENCE OF FAILURE. LBS
PART NAME ASSIGNED BY CONTROLLING AGENCY	RELEASE, BOLT, LATCH
END ITEM IDENTIFICATION	M-2 .50 CAL MACHINE GUN; NSN 1005-00-322-9715

SUBSTITUTES & CROSS-REFERENCES 8

10093848Reference document

Same NSN cross-reference

Reference document — Informative reference only

A10144Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

05415230000525Reference document

Same NSN cross-reference

Reference document — Secondary reference

3662004159Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

75F2016Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

1005005504071Reference document

Same NSN cross-reference

Reference document — Informative reference only

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedDemilitarization required — mutilation + specific procedure

Ready to buy 5504071?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 5504071?

5504071 is a TRANSFORMER,POWER.

What parts can replace 5504071?

There are 8 known substitutes for 5504071: 10093848, A10144, 05415230000525 and 5 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 5504071?

5504071 is cataloged in the U.S. Government catalog under NSN 1005-00-550-4071. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

5504071 — TRANSFORMER,POWER

Request a Quote — 5504071