PartsTable
Technical Data Sheet
PartsTable / MRO / 5502-27
5502-27 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include body_style: CYLINDRICAL SERVO MOUNTED, body_length: 1.100 INCHES MAXIMUM IN, shaft_style: ROUND, bearing_type: BALL SHAFT, pilot_length: 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM IN, shaft_length: 0.543 INCHES MINIMUM AND 0.577 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-289-6495, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 5502-27
NSN: 3110-00-289-6495
FSC: 3110
CAGE: 95019 — DANA CORP SPICER TRANSMISSION DIV (USA)
SPECIFICATIONS
body_styleCYLINDRICAL SERVO MOUNTED
body_length1.100 INCHES MAXIMUM IN
shaft_styleROUND
bearing_typeBALL SHAFT
pilot_length0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM IN
shaft_length0.543 INCHES MINIMUM AND 0.577 INCHES MAXIMUM IN
shaft_runout0.002 INCHES IN
actuator_typeSINGLE SHAFT
body_diameter0.875 INCHES MAXIMUM IN
lateral_runout0.001 INCHES IN
overall_length1.660 INCHES NOMINAL IN
pilot_diameter0.6240 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
NSN3110-00-289-6495
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 5502-27 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 3.3465 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.0930 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
STYLE DESIGNATOR: NORMAL ANGLE
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.8750 INCHES NOMINAL IN
OUTSIDE DIAMETER3.3465 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.0930 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
STYLE DESIGNATORNORMAL ANGLE
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
25527Interchangeable
interchangeable cross-reference
interchangeable
25527NInterchangeable
interchangeable cross-reference
interchangeable
145626Interchangeable
interchangeable cross-reference
interchangeable
206852Interchangeable
interchangeable cross-reference
interchangeable
CS136Interchangeable
interchangeable cross-reference
interchangeable
550-227Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5502-27?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5502-27?
5502-27 is a RESISTOR,VARIABLE,WIRE WOUND,PRE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 5502-27?
There are 13 known substitutes for 5502-27: 25527, 25527N, 145626 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5502-27?
5502-27 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-289-6495. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5502-27

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026