55-9-270-252 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

55-9-270-252: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include body_style: RECTANGULAR W/MOUNTING HOLES, body_width: 0.182 INCHES MINIMUM AND 0.197 INCHES MAXIMUM IN, body_height: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN, body_length: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN, shaft_style: ROUND, SLOTTED, bearing_type: BEARING SHAFT. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-849-9986, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 55-9-270-252

NSN: 5905-00-849-9986
FSC: 5905 — Resistor
CAGE: C7407 — IV-ELECTRONIC KLAUS VESPERMANN KG (DEU)

SPECIFICATIONS

body_style	RECTANGULAR W/MOUNTING HOLES
body_width	0.182 INCHES MINIMUM AND 0.197 INCHES MAXIMUM IN
body_height	0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
body_length	0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
shaft_style	ROUND, SLOTTED
bearing_type	BEARING SHAFT
shaft_length	0.025 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN
actuator_type	SINGLE SHAFT
cubic_measure	0.047 CUBIC INCHES
shaft_diameter	0.058 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
mounting_method	UNTHREADED HOLE(S)
fragility_factor	MODERATELY RUGGED
NSN	5905-00-849-9986

COMPONENT DIAGRAM

KEY FEATURES

•

MAXIMUM RUNNING TORQUE: 10.00 INCH-OUNCES IN

•

ELECTRICAL RESISTANCE PER SECTION: 2.5 KILOHMS SINGLE SECTION

•

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 125.0 SINGLE SECTION

•

SECTION QUANTITY: 1

•

MOUNTING FACILITY QUANTITY: 2

•

SHAFT DIAMETER: 0.058 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN

•

FRAGILITY FACTOR: MODERATELY RUGGED

•

BODY STYLE: RECTANGULAR W/MOUNTING HOLES

TECHNICAL CHARACTERISTICS

MAXIMUM RUNNING TORQUE	10.00 INCH-OUNCES IN
ELECTRICAL RESISTANCE PER SECTION	2.5 KILOHMS SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	125.0 SINGLE SECTION
SECTION QUANTITY	1
MOUNTING FACILITY QUANTITY	2
SHAFT DIAMETER	0.058 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
FRAGILITY FACTOR	MODERATELY RUGGED
BODY STYLE	RECTANGULAR W/MOUNTING HOLES
MOUNTING METHOD	UNTHREADED HOLE(S)
BODY WIDTH	0.182 INCHES MINIMUM AND 0.197 INCHES MAXIMUM IN

OTHER ITEMS IN FSC 5905 — Resistor

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5905-00-000-0136 5905-00-000-0488 5905-00-000-8809 5905-00-000-8833 5905-00-000-9526 5905-00-001-1342 5905-00-001-1573 5905-00-001-2059

SUBSTITUTES & CROSS-REFERENCES 2

L603003059Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

300-181H-2.5KReference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 55-9-270-252?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 55-9-270-252?

55-9-270-252 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).

What parts can replace 55-9-270-252?

There are 2 known substitutes for 55-9-270-252: L603003059, 300-181H-2.5K. Substitute compatibility should be verified for your specific system.

What is the NSN for 55-9-270-252?

55-9-270-252 is cataloged in the U.S. Government catalog under NSN 5905-00-849-9986. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

55-9-270-252 — RESISTOR,VARIABLE,WIRE WOUND,NON

Request a Quote — 55-9-270-252