55-3-3-103 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

55-3-3-103: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include body_style: RECTANGULAR, body_width: 0.170 INCHES NOMINAL IN, body_height: 0.500 INCHES NOMINAL IN, body_length: 0.530 INCHES NOMINAL IN, shaft_style: ROUND, SLOTTED, shaft_length: 0.080 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-914-9613, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 55-3-3-103

NSN: 5905-00-914-9613
FSC: 5905 — Resistor
CAGE: 02111 — VISHAY SPRAGUE INC (USA)

SPECIFICATIONS

body_style	RECTANGULAR
body_width	0.170 INCHES NOMINAL IN
body_height	0.500 INCHES NOMINAL IN
body_length	0.530 INCHES NOMINAL IN
shaft_style	ROUND, SLOTTED
shaft_length	0.080 INCHES NOMINAL IN
actuator_type	SINGLE SHAFT
shaft_diameter	0.093 INCHES NOMINAL IN
mounting_method	TERMINAL
terminal_length	0.188 INCHES NOMINAL IN
section_quantity	1
terminal_location	LOWER ADJACENT SIDE SINGLE ROW LOCATION NOT OTHERWISE SPECIFIED
NSN	5905-00-914-9613

COMPONENT DIAGRAM

KEY FEATURES

•

ELECTRICAL RESISTANCE PER SECTION: 10.0 KILOHMS SINGLE SECTION

•

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 150.0 SINGLE SECTION

•

SECTION QUANTITY: 1

•

SHAFT DIAMETER: 0.093 INCHES NOMINAL IN

•

BODY STYLE: RECTANGULAR

•

TERMINAL LENGTH: 0.188 INCHES NOMINAL IN

•

MOUNTING METHOD: TERMINAL

•

BODY WIDTH: 0.170 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

ELECTRICAL RESISTANCE PER SECTION	10.0 KILOHMS SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION
SECTION QUANTITY	1
SHAFT DIAMETER	0.093 INCHES NOMINAL IN
BODY STYLE	RECTANGULAR
TERMINAL LENGTH	0.188 INCHES NOMINAL IN
MOUNTING METHOD	TERMINAL
BODY WIDTH	0.170 INCHES NOMINAL IN
BODY HEIGHT	0.500 INCHES NOMINAL IN
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-50.0 TO 50.0 SINGLE SECTION

SUBSTITUTES & CROSS-REFERENCES 6

205-296-10KReference document

Same NSN cross-reference

Reference document — Secondary reference

381-1724-100Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

685021C30048-3Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

55-3-8-103Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

201-211-103Reference document

Same NSN cross-reference

Reference document — Secondary reference

201-296-10KSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 55-3-3-103?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 55-3-3-103?

55-3-3-103 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).

What parts can replace 55-3-3-103?

There are 6 known substitutes for 55-3-3-103: 205-296-10K, 381-1724-100, 685021C30048-3 and 3 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 55-3-3-103?

55-3-3-103 is cataloged in the U.S. Government catalog under NSN 5905-00-914-9613. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

55-3-3-103 — RESISTOR,VARIABLE,WIRE WOUND,NON

Request a Quote — 55-3-3-103