PartsTable
Technical Data Sheet
Download PDF

55-22013 PART 20 — SLEEVE,SHAFT,PUMP

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

55-22013 PART 20: SLEEVE,SHAFT,PUMP.

The SLEEVE,SHAFT,PUMP is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY OVERALL, corner_shape: SQUARE ALL CORNERS, overall_length: 4.7080 INCHES MINIMUM AND 4.7280 INCHES MAXIMUM IN, style_designator: SOLID, PLAIN, NO OUTSIDE FLANGES, features_provided: CASEHARDENED, body_inside_diameter: 1.6565 INCHES MINIMUM AND 1.6570 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 4320-00-463-2507, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
55-22013 PART 20
NSN: 4320-00-463-2507
FSC: 4320 — Power and Hand Pumps
CAGE: 52081 — EURAMCO SAFETY INC (USA)
SPECIFICATIONS
materialNICKEL ALLOY OVERALL
corner_shapeSQUARE ALL CORNERS
overall_length4.7080 INCHES MINIMUM AND 4.7280 INCHES MAXIMUM IN
style_designatorSOLID, PLAIN, NO OUTSIDE FLANGES
features_providedCASEHARDENED
body_inside_diameter1.6565 INCHES MINIMUM AND 1.6570 INCHES MAXIMUM IN
body_outside_diameter1.8740 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM IN
NSN4320-00-463-2507
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available SLEEVE,SHAFT,PUMP TITLE COMPONENT PN 55-22013 PART 20 MFR SLEEVE,SHAFT,PUMP
KEY FEATURES
•
CORNER SHAPE: SQUARE ALL CORNERS
•
BODY OUTSIDE DIAMETER: 1.8740 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: SOLID, PLAIN, NO OUTSIDE FLANGES
•
FEATURES PROVIDED: CASEHARDENED
•
BODY INSIDE DIAMETER: 1.6565 INCHES MINIMUM AND 1.6570 INCHES MAXIMUM IN
•
MATERIAL: NICKEL ALLOY OVERALL
TECHNICAL CHARACTERISTICS
CORNER SHAPESQUARE ALL CORNERS
BODY OUTSIDE DIAMETER1.8740 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM IN
STYLE DESIGNATORSOLID, PLAIN, NO OUTSIDE FLANGES
OVERALL LENGTH4.7080 INCHES MINIMUM AND 4.7280 INCHES MAXIMUM IN
FEATURES PROVIDEDCASEHARDENED
BODY INSIDE DIAMETER1.6565 INCHES MINIMUM AND 1.6570 INCHES MAXIMUM IN
MATERIALNICKEL ALLOY OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
55-22013Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 55-22013 PART 20?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 55-22013 PART 20?
55-22013 PART 20 is a SLEEVE,SHAFT,PUMP.
What parts can replace 55-22013 PART 20?
There is 1 known substitute for 55-22013 PART 20: 55-22013. Substitute compatibility should be verified for your specific system.
What is the NSN for 55-22013 PART 20?
55-22013 PART 20 is cataloged in the U.S. Government catalog under NSN 4320-00-463-2507. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 55-22013 PART 20

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.