PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 55-114
55-114 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The MICROCIRCUIT,DIGITAL is a the manufacturer industrial component. Key specifications include body_width: 0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN, body_height: 0.140 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN, body_length: 0.840 INCHES MAXIMUM IN, bore_diameter: 0.4997 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN, mounting_type: BASE, control_location: CENTER. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-367-2612, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
55-114
NSN: 5330-00-367-2612
FSC: 5330
CAGE: 10855 — CARRIER CORP (USA)
SPECIFICATIONS
body_width0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
body_height0.140 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
body_length0.840 INCHES MAXIMUM IN
bore_diameter0.4997 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
mounting_typeBASE
control_locationCENTER
drive_shaft_typeSPLINED, STRAIGHT EXTERNAL
special_features0.562-18 NF-3B CASE DRAIN;0.437-KO NF-3B SEEPAGE DRAIN
style_designatorWITHOUT INSERT OR LINER WITH STAKING GROOVE
cylinder_quantity1
features_providedHERMETICALLY SEALED AND MONOLITHIC AND POSITIVE OUTPUTS AND HIGH SPEED AND HIGH CURRENT
discharge_pressure0000.0 ENERGY EFFICIENT - FEMP - LOW STANDBY POWER - OFFICE EQUIPMENT -INTEGRATED COMPUTERS
NSN5330-00-367-2612
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 55-114 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SUPPLEMENTARY FEATURES: CROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESSTYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200
SUPPLEMENTARY FEATURESCROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
55114Interchangeable
interchangeable cross-reference
interchangeable
WBGP8S2Interchangeable
interchangeable cross-reference
interchangeable
KSBY8-10Interchangeable
interchangeable cross-reference
interchangeable
9614PCInterchangeable
interchangeable cross-reference
interchangeable
MA9614PCInterchangeable
interchangeable cross-reference
interchangeable
5962-3810403BEXInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 55-114?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 55-114?
55-114 is a MICROCIRCUIT,DIGITAL.
What parts can replace 55-114?
There are 10 known substitutes for 55-114: 55114, WBGP8S2, KSBY8-10 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 55-114?
55-114 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-367-2612. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 55-114

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026