PartsTable
Technical Data Sheet
Download PDF

55-0207-29 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

55-0207-29: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: PAN NO. 2, head_height: 0.082 INCHES NOMINAL IN, thread_class: 2A A, head_diameter: 0.270 INCHES NOMINAL IN, thread_length: 0.437 INCHES MAXIMUM IN, screw_material: STEEL COMP 304.

This part is cataloged in the U.S. Government catalog under NSN 5305-00-172-8291, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
55-0207-29
NSN: 5305-00-172-8291
FSC: 5305 — Screws
CAGE: 72914 — GRIMES AEROSPACE COMPANY (USA)
SPECIFICATIONS
head_stylePAN NO. 2
head_height0.082 INCHES NOMINAL IN
thread_class2A A
head_diameter0.270 INCHES NOMINAL IN
thread_length0.437 INCHES MAXIMUM IN
screw_materialSTEEL COMP 304
fastener_length0.437 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.138 INCHES IN
screw_surface_treatmentPASSIVATE
minimum_tensile_strength80000 POUNDS PER SQUARE INCH LBS
NSN5305-00-172-8291
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 55-0207-29 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.082 INCHES NOMINAL IN
•
SCREW SURFACE TREATMENT: PASSIVATE
•
FASTENER LENGTH: 0.437 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.437 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
HEAD STYLE: PAN NO. 2
•
THREAD DIRECTION: RIGHT-HAND
•
DEPARTURE FROM CITED DOCUMENT: AS MODIFIED BY MATERIAL
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.082 INCHES NOMINAL IN
SCREW SURFACE TREATMENTPASSIVATE
FASTENER LENGTH0.437 INCHES MAXIMUM IN
THREAD LENGTH0.437 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.138 INCHES IN
HEAD STYLEPAN NO. 2
THREAD DIRECTIONRIGHT-HAND
DEPARTURE FROM CITED DOCUMENTAS MODIFIED BY MATERIAL
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 9S STYLE
SCREW MATERIALSTEEL COMP 304
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 1
FFS92Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 55-0207-29?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 55-0207-29?
55-0207-29 is a SCREW,MACHINE.
What parts can replace 55-0207-29?
There is 1 known substitute for 55-0207-29: FFS92. Substitute compatibility should be verified for your specific system.
What is the NSN for 55-0207-29?
55-0207-29 is cataloged in the U.S. Government catalog under NSN 5305-00-172-8291. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 55-0207-29