PartsTable
Technical Data Sheet
Download PDF

5497844-1 — BEARING,ROLLER,NEEDLE

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

5497844-1: BEARING,ROLLER,NEEDLE.

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 0.4996 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN, alignment_type: RIGID, surface_finish: GROUND, inner_ring_width: 1.0625 INCHES NOMINAL IN, outer_ring_width: 1.0000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-843-8410, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5497844-1
NSN: 3110-00-843-8410
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter0.4996 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
alignment_typeRIGID
surface_finishGROUND
inner_ring_width1.0625 INCHES NOMINAL IN
outer_ring_width1.0000 INCHES NOMINAL IN
special_featuresOIL HOLE AND GROOVE IN INNER RACE
style_designatorAIRFRAME, HARDENED AND GROUND, NON-SEPARABLE
overall_outside_diameter1.8740 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM IN
retainer_fabrication_methodPRESSED
NSN3110-00-843-8410
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 5497844-1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
OUTER RING WIDTH: 1.0000 INCHES NOMINAL IN
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: AIRFRAME, HARDENED AND GROUND, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 1.8740 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM IN
•
ALIGNMENT TYPE: RIGID
•
BORE DIAMETER: 0.4996 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
OUTER RING WIDTH1.0000 INCHES NOMINAL IN
SURFACE FINISHGROUND
STYLE DESIGNATORAIRFRAME, HARDENED AND GROUND, NON-SEPARABLE
OVERALL OUTSIDE DIAMETER1.8740 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM IN
ALIGNMENT TYPERIGID
SPECIAL FEATURESOIL HOLE AND GROOVE IN INNER RACE
BORE DIAMETER0.4996 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
INNER RING WIDTH1.0625 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 3
CYR7-8SReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
YR-1-7/8-X-16Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
D1007-3FReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 5497844-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5497844-1?
5497844-1 is a BEARING,ROLLER,NEEDLE.
What parts can replace 5497844-1?
There are 3 known substitutes for 5497844-1: CYR7-8S, YR-1-7/8-X-16, D1007-3F. Substitute compatibility should be verified for your specific system.
What is the NSN for 5497844-1?
5497844-1 is cataloged in the U.S. Government catalog under NSN 3110-00-843-8410. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5497844-1