5497375-7 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

5497375-7: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 OVERALL, first_end_style: CHAMFERED, special_features: HOLE IS 20UNF-2B THREADED LEFT HAND WITH 0.620 IN. WIDE SQUARE CUT OUTS ON BOTH ENDS IN, pin_overall_length: 1.479 INCHES NOMINAL IN, first_hole_diameter: 0.500 INCHES NOMINAL IN, pin_overall_diameter: 0.9930 INCHES MINIMUM AND 0.9940 INCHES MAXIMUM IN.

This part is cataloged in the U.S. Government catalog under NSN 5315-01-374-8535, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

5497375-7

NSN: 5315-01-374-8535
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)

SPECIFICATIONS

material	STEEL COMP 4130 OVERALL
first_end_style	CHAMFERED
special_features	HOLE IS 20UNF-2B THREADED LEFT HAND WITH 0.620 IN. WIDE SQUARE CUT OUTS ON BOTH ENDS IN
pin_overall_length	1.479 INCHES NOMINAL IN
first_hole_diameter	0.500 INCHES NOMINAL IN
pin_overall_diameter	0.9930 INCHES MINIMUM AND 0.9940 INCHES MAXIMUM IN
first_end_taper_angle	45.0 DEGREES NOMINAL
first_end_taper_length	0.050 INCHES NOMINAL IN
hole_arrangement_style	DRILLED THRU CENTER
second_end_relationship_with_first_end	IDENTICAL
NSN	5315-01-374-8535

COMPONENT DIAGRAM

KEY FEATURES

•

FIRST END TAPER LENGTH: 0.050 INCHES NOMINAL IN

•

HOLE ARRANGEMENT STYLE: DRILLED THRU CENTER

•

FIRST END STYLE: CHAMFERED

•

FIRST HOLE DIAMETER: 0.500 INCHES NOMINAL IN

•

FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL

•

PIN OVERALL DIAMETER: 0.9930 INCHES MINIMUM AND 0.9940 INCHES MAXIMUM IN

•

PIN OVERALL LENGTH: 1.479 INCHES NOMINAL IN

•

SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL

TECHNICAL CHARACTERISTICS

FIRST END TAPER LENGTH	0.050 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLE	DRILLED THRU CENTER
FIRST END STYLE	CHAMFERED
FIRST HOLE DIAMETER	0.500 INCHES NOMINAL IN
FIRST END TAPER ANGLE	45.0 DEGREES NOMINAL
PIN OVERALL DIAMETER	0.9930 INCHES MINIMUM AND 0.9940 INCHES MAXIMUM IN
PIN OVERALL LENGTH	1.479 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST END	IDENTICAL
SPECIAL FEATURES	HOLE IS 20UNF-2B THREADED LEFT HAND WITH 0.620 IN. WIDE SQUARE CUT OUTS ON BOTH ENDS IN
MATERIAL	STEEL COMP 4130 OVERALL

OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602

SUBSTITUTES & CROSS-REFERENCES 1

NOR5497375 006Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 5497375-7?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 5497375-7?

5497375-7 is a PIN,STRAIGHT,HEADLESS.

What parts can replace 5497375-7?

There is 1 known substitute for 5497375-7: NOR5497375 006. Substitute compatibility should be verified for your specific system.

What is the NSN for 5497375-7?

5497375-7 is cataloged in the U.S. Government catalog under NSN 5315-01-374-8535. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

5497375-7 — PIN,STRAIGHT,HEADLESS

Request a Quote — 5497375-7