PartsTable
Technical Data Sheet
Download PDF

5497061-1 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5497061-1: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 OVERALL, hole_diameter: 0.311 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN, shank_diameter: 0.770 INCHES MINIMUM AND 0.785 INCHES MAXIMUM IN, fork_span_width: 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN, surface_treatment: PAINT BODY, securing_pin_hole_diameter: 0.217 INCHES MINIMUM AND 0.223 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-277-9995, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5497061-1
NSN: 5340-01-277-9995
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL COMP 4130 OVERALL
hole_diameter0.311 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
shank_diameter0.770 INCHES MINIMUM AND 0.785 INCHES MAXIMUM IN
fork_span_width0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
surface_treatmentPAINT BODY
securing_pin_hole_diameter0.217 INCHES MINIMUM AND 0.223 INCHES MAXIMUM IN
material_document_and_classificationMIL-S-6758,COND D4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
distance_from_pivot_pinhole_center_to_fork_end0.475 INCHES NOMINAL IN
distance_from_center_of_securing_pin_hole_to_rod_end0.750 INCHES NOMINAL IN
distance_from_pivot_pinhole_center_to_rod_connection_end6.525 INCHES NOMINAL IN
NSN5340-01-277-9995
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5497061-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.770 INCHES MINIMUM AND 0.785 INCHES MAXIMUM IN
•
FORK SPAN WIDTH: 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
•
SECURING PIN HOLE DIAMETER: 0.217 INCHES MINIMUM AND 0.223 INCHES MAXIMUM IN
•
DISTANCE FROM PIVOT PINHOLE CENTER TO FORK END: 0.475 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6758,COND D4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
SURFACE TREATMENT: PAINT BODY
•
MATERIAL: STEEL COMP 4130 OVERALL
•
DISTANCE FROM CENTER OF SECURING PIN HOLE TO ROD END: 0.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.770 INCHES MINIMUM AND 0.785 INCHES MAXIMUM IN
FORK SPAN WIDTH0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
SECURING PIN HOLE DIAMETER0.217 INCHES MINIMUM AND 0.223 INCHES MAXIMUM IN
DISTANCE FROM PIVOT PINHOLE CENTER TO FORK END0.475 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6758,COND D4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENTPAINT BODY
MATERIALSTEEL COMP 4130 OVERALL
DISTANCE FROM CENTER OF SECURING PIN HOLE TO ROD END0.750 INCHES NOMINAL IN
HOLE DIAMETER0.311 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END6.525 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5497061-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5497061-1?
5497061-1 is a CLEVIS,ROD END.
What is the NSN for 5497061-1?
5497061-1 is cataloged in the U.S. Government catalog under NSN 5340-01-277-9995. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5497061-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.