PartsTable / COMPONENT / 54967-9
54967-9
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.170 INCHES NOMINAL IN, material: PLASTIC BAND, overall_width: 0.375 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.050 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-811-8387, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
54967-9
NSN: 5340-00-811-8387 FSC: 5340 CAGE: 96214 — RAYTHEON COMPANY DBA RAYTHEON (USA)
SPECIFICATIONS
diameter 0.170 INCHES NOMINAL IN material PLASTIC BAND overall_width 0.375 INCHES NOMINAL IN style_designator SINGLE LOOP tongue_hole_type ROUND, UNTHREADED material_thickness 0.050 INCHES NOMINAL IN loop_inside_diameter 0.600 INCHES NOMINAL IN distance_from_loop_center_to_tongue_end 0.813 INCHES NOMINAL IN center_to_center_distance_between_loop_and_mounting_hole 0.594 INCHES NOMINAL IN NSN 5340-00-811-8387
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 54967-9
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• STYLE DESIGNATOR: SINGLE LOOP
• DIAMETER: 0.170 INCHES NOMINAL IN
• DISTANCE FROM LOOP CENTER TO TONGUE END: 0.813 INCHES NOMINAL IN
• LOOP INSIDE DIAMETER: 0.600 INCHES NOMINAL IN
• CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.594 INCHES NOMINAL IN
• MATERIAL THICKNESS: 0.050 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL PLASTIC BAND STYLE DESIGNATOR SINGLE LOOP DIAMETER 0.170 INCHES NOMINAL IN DISTANCE FROM LOOP CENTER TO TONGUE END 0.813 INCHES NOMINAL IN LOOP INSIDE DIAMETER 0.600 INCHES NOMINAL IN OVERALL WIDTH 0.375 INCHES NOMINAL IN CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE 0.594 INCHES NOMINAL IN MATERIAL THICKNESS 0.050 INCHES NOMINAL IN TONGUE HOLE TYPE ROUND, UNTHREADED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
710876-9 Upgraded Successor successor cross-reference
successor
HP-9N Upgraded Successor successor cross-reference
successor
8177337 Upgraded Successor successor cross-reference
successor
7432493P8 Upgraded Successor successor cross-reference
successor
10607442-1 Upgraded Successor successor cross-reference
successor
564088-8 Interchangeable Same NIIN cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 54967-9?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 54967-9?
54967-9 is a CLAMP,LOOP.
What parts can replace 54967-9?
There are 11 known substitutes for 54967-9: 710876-9, HP-9N, 8177337 and 8 more. Substitute compatibility should be verified for your specific system.
Is 54967-9 still available?
54967-9 is currently cancelled.
Request a Quote — 54967-9