PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5495
5495 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The COVER NAME PLATE is a the manufacturer industrial component. Key specifications include special_features: HISTOMODULE STAND, 110 CASSETTES; FOR USE WITH END ITEM TISSUE PROCESSOR, AUTOMATIC, LABORATORY, NSN 6640-01-540-3044, end_item_identification: 6640-01-540-3044, part_name_assigned_by_controlling_agency: HISTOMODULE STAND 110 CASSETTES. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-117-0655, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5495
NSN: 3110-00-117-0655
FSC: 3110
CAGE: 06650 — BELL AND HOWELL PHILLIPSBURG CO CORPORATE OFFICES (USA)
SPECIFICATIONS
special_featuresHISTOMODULE STAND, 110 CASSETTES; FOR USE WITH END ITEM TISSUE PROCESSOR, AUTOMATIC, LABORATORY, NSN 6640-01-540-3044
end_item_identification6640-01-540-3044
part_name_assigned_by_controlling_agencyHISTOMODULE STAND 110 CASSETTES
NSN3110-00-117-0655
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 5495 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ROLLING ELEMENT DIAMETER: 0.0618 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 5140 OVERALL
•
STYLE DESIGNATOR: NEEDLE ROLLER, FLAT ENDS
TECHNICAL CHARACTERISTICS (FLIS)
ROLLING ELEMENT DIAMETER0.0618 INCHES NOMINAL IN
OVERALL LENGTH0.2680 INCHES NOMINAL IN
MATERIALSTEEL COMP 5140 OVERALL
STYLE DESIGNATORNEEDLE ROLLER, FLAT ENDS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
5495Interchangeable
interchangeable cross-reference
interchangeable
5495 15991Interchangeable
interchangeable cross-reference
interchangeable
339D827H57Interchangeable
interchangeable cross-reference
interchangeable
405-417PCF8Interchangeable
interchangeable cross-reference
interchangeable
7037095Interchangeable
interchangeable cross-reference
interchangeable
6640NCM072061Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5495?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5495?
5495 is a COVER NAME PLATE.
What parts can replace 5495?
There are 8 known substitutes for 5495: 5495, 5495 15991, 339D827H57 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5495?
5495 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-117-0655. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5495

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026