PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 548BM416
548BM416 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.625 INCHES NOMINAL IN, temp_rating: -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF, outside_diameter: 5.506 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-255-0797, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
548BM416
NSN: 5330-00-255-0797
FSC: 5330
CAGE: 80201 — SKF USA INC. DBA SKF AEROSPACE SEALING SOLUTIONS (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.625 INCHES NOMINAL IN
temp_rating-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
outside_diameter5.506 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter5.501 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter4.500 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed1000 FEET PER MINUTE FT
NSN5330-00-255-0797
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 548BM416 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 5.506 INCHES NOMINAL IN
•
TEMP RATING: -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
•
ACCOMMODATED SHAFT DIAMETER: 4.500 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
•
CASE STYLE: SQUARE
•
SURFACE TREATMENT: PLASTIC CASE
•
HOUSING BORE DIAMETER: 5.501 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 1000 FEET PER MINUTE FT
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER5.506 INCHES NOMINAL IN
TEMP RATING-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
ACCOMMODATED SHAFT DIAMETER4.500 INCHES NOMINAL IN
MATERIALSTEEL CASE
CASE STYLESQUARE
SURFACE TREATMENTPLASTIC CASE
HOUSING BORE DIAMETER5.501 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED1000 FEET PER MINUTE FT
SEAL WIDTH0.625 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
6314Interchangeable
interchangeable cross-reference
interchangeable
16-1001Interchangeable
interchangeable cross-reference
interchangeable
44968Interchangeable
interchangeable cross-reference
interchangeable
51672Interchangeable
interchangeable cross-reference
interchangeable
7510-00-789-2455Interchangeable
interchangeable cross-reference
interchangeable
SK44968Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 548BM416?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 548BM416?
548BM416 is a SEAL,PLAIN ENCASED.
What parts can replace 548BM416?
There are 7 known substitutes for 548BM416: 6314, 16-1001, 44968 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 548BM416?
548BM416 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-255-0797. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 548BM416

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026