PartsTable
Technical Data Sheet
Download PDF

5486645 SHH-19 — ACTUATOR,HYDRAULIC-PNEUMATIC,ROT

✓ Government record, cited
— · GATE VALVE
PRODUCT OVERVIEW

5486645 SHH-19: ACTUATOR,HYDRAULIC-PNEUMATIC,ROT.

ACTUATOR,HYDRAULIC-PNEUMATIC,ROT. Key specifications include overall_width: 12.750 INCHES NOMINAL IN, overall_height: 12.430 INCHES NOMINAL IN, pressure_rating: 3000.0 POUNDS PER SQUARE INCH (PSI) NOMINAL LBS, rotation_in_deg: 110.0, output_drive_torque_rating: 300.000 INCH-POUNDS IN, integral_valve_operation_method: ELECTRIC. This part is cataloged in the U.S.

Government catalog under NSN 4810-01-275-3838, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5486645 SHH-19
NSN: 4810-01-275-3838
FSC: 4810 — Valves, Powered
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
overall_width12.750 INCHES NOMINAL IN
overall_height12.430 INCHES NOMINAL IN
pressure_rating3000.0 POUNDS PER SQUARE INCH (PSI) NOMINAL LBS
rotation_in_deg110.0
output_drive_torque_rating300.000 INCH-POUNDS IN
integral_valve_operation_methodELECTRIC
NSN4810-01-275-3838
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: 5486645 SHH-19 · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PRESSURE RATING: 3000.0 POUNDS PER SQUARE INCH (PSI) NOMINAL LBS
•
OUTPUT DRIVE TORQUE RATING: 300.000 INCH-POUNDS IN
•
ROTATION IN DEG: 110.0
•
INTEGRAL VALVE OPERATION METHOD: ELECTRIC
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT12.430 INCHES NOMINAL IN
PRESSURE RATING3000.0 POUNDS PER SQUARE INCH (PSI) NOMINAL LBS
OUTPUT DRIVE TORQUE RATING300.000 INCH-POUNDS IN
OVERALL WIDTH12.750 INCHES NOMINAL IN
ROTATION IN DEG110.0
INTEGRAL VALVE OPERATION METHODELECTRIC
SUBSTITUTES & CROSS-REFERENCES 3
122-5486620 ITEM 46Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
122-5486620 ITEM 05Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
122-5343921 ITEM 05Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — mutilation
Ready to buy 5486645 SHH-19?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5486645 SHH-19?
5486645 SHH-19 is a ACTUATOR,HYDRAULIC-PNEUMATIC,ROT.
What parts can replace 5486645 SHH-19?
There are 3 known substitutes for 5486645 SHH-19: 122-5486620 ITEM 46, 122-5486620 ITEM 05, 122-5343921 ITEM 05. Substitute compatibility should be verified for your specific system.
What is the NSN for 5486645 SHH-19?
5486645 SHH-19 is cataloged in the U.S. Government catalog under NSN 4810-01-275-3838. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5486645 SHH-19