PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 54853-5
54853-5 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,SELF-LOCKING,CLINCH is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, nut_style: CLINCH, nut_height: 0.185 INCHES MAXIMUM IN, lubrication: DRY FILM LUBRICANT, nut_diameter: 0.312 INCHES NOMINAL IN, pilot_length: 0.060 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-137-6347, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
54853-5
NSN: 5310-01-137-6347
FSC: 5310
CAGE: 99167 — HAMILTON SUNDSTRAND CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
nut_styleCLINCH
nut_height0.185 INCHES MAXIMUM IN
lubricationDRY FILM LUBRICANT
nut_diameter0.312 INCHES NOMINAL IN
pilot_length0.060 INCHES MAXIMUM IN
thread_class3B
thread_seriesUNF
pilot_diameter0.289 INCHES MAXIMUM IN
locking_featurePREVAILING TORQUE ALL METAL DESIGN
thread_directionRIGHT-HAND
surface_treatmentCHROMATE OVERALL
NSN5310-01-137-6347
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 54853-5 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT DIAMETER: 0.312 INCHES NOMINAL IN
•
LUBRICATION: DRY FILM LUBRICANT
•
THREAD QUANTITY PER INCH: 32
•
THREAD SERIES: UNF
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
MATERIAL: STEEL COMP 303 OVERALL
•
PILOT DIAMETER: 0.289 INCHES MAXIMUM IN
•
LOCKING FEATURE: PREVAILING TORQUE ALL METAL DESIGN
TECHNICAL CHARACTERISTICS (FLIS)
NUT DIAMETER0.312 INCHES NOMINAL IN
LUBRICATIONDRY FILM LUBRICANT
THREAD QUANTITY PER INCH32
THREAD SERIESUNF
NOMINAL THREAD SIZE0.190 INCHES IN
MATERIALSTEEL COMP 303 OVERALL
PILOT DIAMETER0.289 INCHES MAXIMUM IN
LOCKING FEATUREPREVAILING TORQUE ALL METAL DESIGN
THREAD CLASS3B
PILOT LENGTH0.060 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
10109319Interchangeable
interchangeable cross-reference
interchangeable
FE-032Interchangeable
interchangeable cross-reference
interchangeable
5310PL0839527Interchangeable
interchangeable cross-reference
interchangeable
510LNK-.(060)Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 54853-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 54853-5?
54853-5 is a NUT,SELF-LOCKING,CLINCH.
What parts can replace 54853-5?
There are 4 known substitutes for 54853-5: 10109319, FE-032, 5310PL0839527 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 54853-5?
54853-5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-137-6347. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 54853-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026